P PacketofCrisps Audioholic Intern Dec 22, 2021 30 0 6 48 Jan 27, 2022 #3,301 Yamaha still looking into the dialogue bleed it seems, they asked me to send them a backup file of the settings on the receiver, for now I'm using dts neural x on 'Standard' decoder setting while watching 2.0 content.
Yamaha still looking into the dialogue bleed it seems, they asked me to send them a backup file of the settings on the receiver, for now I'm using dts neural x on 'Standard' decoder setting while watching 2.0 content.
VASKION Audioholic Nov 9, 2021 101 0 16 44 Jan 28, 2022 #3,302 PacketofCrisps said: Yamaha still looking into the dialogue bleed it seems, they asked me to send them a backup file of the settings on the receiver, for now I'm using dts neural x on 'Standard' decoder setting while watching 2.0 content. Click to expand... Just out of curiosity, do you use “Dialogue” > “Dialogue Lift” option with setting higher than 0? RX-A4A | Adjusting the perceived height of dialogue sound manual.yamaha.com
PacketofCrisps said: Yamaha still looking into the dialogue bleed it seems, they asked me to send them a backup file of the settings on the receiver, for now I'm using dts neural x on 'Standard' decoder setting while watching 2.0 content. Click to expand... Just out of curiosity, do you use “Dialogue” > “Dialogue Lift” option with setting higher than 0? RX-A4A | Adjusting the perceived height of dialogue sound manual.yamaha.com
B brentman05 Audiophyte Jan 28, 2022 2 0 1 43 Jan 28, 2022 #3,303 Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time?
Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time?
C chapp Audioholic Nov 17, 2021 109 0 16 Jan 28, 2022 #3,304 brentman05 said: Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time? Click to expand... Just keep refreshing the Best Buy site. Good luck
brentman05 said: Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time? Click to expand... Just keep refreshing the Best Buy site. Good luck
AcuDefTechGuy Audioholic Jedi Jul 10, 2007 34,057 0 113 Jan 28, 2022 #3,305 brentman05 said: Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time? Click to expand... I am seeing some in stock now. Talk to your dealer. Reactions: Replicant 7
brentman05 said: Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time? Click to expand... I am seeing some in stock now. Talk to your dealer.
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Jan 28, 2022 #3,306 brentman05 said: Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time? Click to expand... Hit @AcuDefTechGuy up! You will not be disappointed! Reactions: JNMNL52
brentman05 said: Does anyone have an idea when the A8A is going to be back in stock? It also appears that all of the receivers in this price category for Marantz are out of stock. Is this because of an upgrade for the 2.1? I know about the Taiwan fiasco, but why should all of them be out of stock at the same time? Click to expand... Hit @AcuDefTechGuy up! You will not be disappointed!
Trell Audioholic Spartan Dec 12, 2018 7,073 0 63 ::1 Jan 28, 2022 #3,307 Replicant 7 said: Hit @AcuDefTechGuy up! You will not be disappointed! Click to expand... His yaw is very straight and hard, so be careful to take proper precautions before you attempt a “hit”. Otherwise you will be sorely disappointed, and your hand even more so to be connected to *****! Reactions: panteragstk and Replicant 7
Replicant 7 said: Hit @AcuDefTechGuy up! You will not be disappointed! Click to expand... His yaw is very straight and hard, so be careful to take proper precautions before you attempt a “hit”. Otherwise you will be sorely disappointed, and your hand even more so to be connected to *****!
AVR Enthu Full Audioholic Dec 12, 2020 469 0 16 Jan 28, 2022 #3,308 brentman05 said: Is this because of an upgrade for the 2.1? Click to expand... No. New production lines of all AVRs already have 40 Gbps ports installed (firmware pending...), apart from 2020 models that have 24 Gbps. Sound United will refresh their mid and higher tier line this year to include multi-input 2.1 ports, just like 2021 Yamahas.
brentman05 said: Is this because of an upgrade for the 2.1? Click to expand... No. New production lines of all AVRs already have 40 Gbps ports installed (firmware pending...), apart from 2020 models that have 24 Gbps. Sound United will refresh their mid and higher tier line this year to include multi-input 2.1 ports, just like 2021 Yamahas.
P PacketofCrisps Audioholic Intern Dec 22, 2021 30 0 6 48 Jan 29, 2022 #3,309 VASKION said: Just out of curiosity, do you use “Dialogue” > “Dialogue Lift” option with setting higher than 0? RX-A4A | Adjusting the perceived height of dialogue sound manual.yamaha.com Click to expand... No don't use dialogue lift, tbh I don't think a lot of people will notice the dialogue bleed in a 'normal' sized room, my lounge is quite literary a shoe box so when someone sits on either side of the sofa a rear speaker will be right by their head. The thing is if Dolby say this is normal for the 'Dolby surround' decoding then fine, but I don't believe it's correct, DTS Neural x has zero bleed, Dolby 5.1 has zero bleed, Dolby Pro-Logic II on my older receivers also have zero bleed, unless 'Dolby Surround' is a new approach to up mixing 2.0 content something is amiss. Last edited: Jan 29, 2022
VASKION said: Just out of curiosity, do you use “Dialogue” > “Dialogue Lift” option with setting higher than 0? RX-A4A | Adjusting the perceived height of dialogue sound manual.yamaha.com Click to expand... No don't use dialogue lift, tbh I don't think a lot of people will notice the dialogue bleed in a 'normal' sized room, my lounge is quite literary a shoe box so when someone sits on either side of the sofa a rear speaker will be right by their head. The thing is if Dolby say this is normal for the 'Dolby surround' decoding then fine, but I don't believe it's correct, DTS Neural x has zero bleed, Dolby 5.1 has zero bleed, Dolby Pro-Logic II on my older receivers also have zero bleed, unless 'Dolby Surround' is a new approach to up mixing 2.0 content something is amiss.
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Jan 31, 2022 #3,310 February is just about here, will Yamaha follow through with it's promised updates? Yamme owner's what say you?
February is just about here, will Yamaha follow through with it's promised updates? Yamme owner's what say you?
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Jan 31, 2022 #3,311 AVR Enthu said: No. New production lines of all AVRs already have 40 Gbps ports installed (firmware pending...), apart from 2020 models that have 24 Gbps. Sound United will refresh their mid and higher tier line this year to include multi-input 2.1 ports, just like 2021 Yamahas. Click to expand... @AVR Enthu , any word you know of, for Yamaha's long awaited promise updates in February? What say you, broski cheese slice? Oh umm, yeah just buy Yamaha.
AVR Enthu said: No. New production lines of all AVRs already have 40 Gbps ports installed (firmware pending...), apart from 2020 models that have 24 Gbps. Sound United will refresh their mid and higher tier line this year to include multi-input 2.1 ports, just like 2021 Yamahas. Click to expand... @AVR Enthu , any word you know of, for Yamaha's long awaited promise updates in February? What say you, broski cheese slice? Oh umm, yeah just buy Yamaha.
AVR Enthu Full Audioholic Dec 12, 2020 469 0 16 Jan 31, 2022 #3,312 Replicant 7 said: @AVR Enthu , any word you know of, for Yamaha's long awaited promise updates in February? What say you, broski cheese slice? Oh umm, yeah just buy Yamaha. Click to expand... We have not heard of any dates for firmware roll out as yet. Silence across the board. I am hearing that new Yamahas are already receiving serious discounts in Australia for referbished A8A units, from $6300 to $4900 AUD.
Replicant 7 said: @AVR Enthu , any word you know of, for Yamaha's long awaited promise updates in February? What say you, broski cheese slice? Oh umm, yeah just buy Yamaha. Click to expand... We have not heard of any dates for firmware roll out as yet. Silence across the board. I am hearing that new Yamahas are already receiving serious discounts in Australia for referbished A8A units, from $6300 to $4900 AUD.
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Feb 1, 2022 #3,313 Just got New Update! All New Yamaha Adventage Owners check yours! Update is: 1.59. Reactions: AcuDefTechGuy, SithZedi and OldAndSlowDev
clone1008 Full Audioholic Nov 1, 2021 291 0 16 Feb 1, 2022 #3,314 Replicant 7 said: Just got New Update! All New Yamaha Adventage Owners check yours! Update is: 1.59. View attachment 53502 Click to expand... Nothing yet for my A6A, the update isn't showing on the website yet either... Reactions: Replicant 7
Replicant 7 said: Just got New Update! All New Yamaha Adventage Owners check yours! Update is: 1.59. View attachment 53502 Click to expand... Nothing yet for my A6A, the update isn't showing on the website yet either...
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Feb 1, 2022 #3,315 clone1008 said: Nothing yet for my A6A, the update isn't showing on the website yet either... View attachment 53503 Click to expand... Yeah, I checked also. Shows nothing or what the 1.59 update does. But I got it very early this morning. Here it is. Also, from what I see got a few more to go Last edited: Feb 1, 2022 Reactions: clone1008
clone1008 said: Nothing yet for my A6A, the update isn't showing on the website yet either... View attachment 53503 Click to expand... Yeah, I checked also. Shows nothing or what the 1.59 update does. But I got it very early this morning. Here it is. Also, from what I see got a few more to go
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Feb 1, 2022 #3,316 @clone1008 Top of the morning to ya bro! You drinking coffee? Got mine!
clone1008 Full Audioholic Nov 1, 2021 291 0 16 Feb 1, 2022 #3,317 Replicant 7 said: @clone1008 Top of the morning to ya bro! You drinking coffee? Got mine! Click to expand... Back at ya! Yep drinking my fresh ground French Roast go go juice! Reactions: Replicant 7
Replicant 7 said: @clone1008 Top of the morning to ya bro! You drinking coffee? Got mine! Click to expand... Back at ya! Yep drinking my fresh ground French Roast go go juice!
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Feb 1, 2022 #3,318 clone1008 said: Back at ya! Yep drinking my fresh ground French Roast go go juice! Click to expand... Yep life is good! Any day above ground is a good day in my book. You picked up any new gear lately?
clone1008 said: Back at ya! Yep drinking my fresh ground French Roast go go juice! Click to expand... Yep life is good! Any day above ground is a good day in my book. You picked up any new gear lately?
clone1008 Full Audioholic Nov 1, 2021 291 0 16 Feb 1, 2022 #3,319 Replicant 7 said: Yep life is good! Any day above ground is a good day in my book. You picked up any new gear lately? Click to expand... No new gear AV wise but doing some house renovations. Extending the back porch, painting the exterior, new front door, new flooring, etc. Reactions: Replicant 7
Replicant 7 said: Yep life is good! Any day above ground is a good day in my book. You picked up any new gear lately? Click to expand... No new gear AV wise but doing some house renovations. Extending the back porch, painting the exterior, new front door, new flooring, etc.
Replicant 7 Audioholic Samurai Jun 29, 2021 2,363 0 36 Feb 1, 2022 #3,320 clone1008 said: No new gear AV wise but doing some house renovations. Extending the back porch, painting the exterior, new front door, new flooring, etc. Click to expand... Nice! Just as soon huh, can't take the money with you. Enjoy the ride bro! After all that's about all we can do before our time is up. Reactions: SithZedi and clone1008
clone1008 said: No new gear AV wise but doing some house renovations. Extending the back porch, painting the exterior, new front door, new flooring, etc. Click to expand... Nice! Just as soon huh, can't take the money with you. Enjoy the ride bro! After all that's about all we can do before our time is up.
