Trell Audioholic Spartan Dec 12, 2018 7,073 0 63 ::1 Nov 4, 2020 #161 AcuDefTechGuy said: As silent as they are, each fan is adding 20dB of Noise. There goes the great ASR specs. When Amir does his next measurements, somebody needs to remind him to add 3 x 120mm fans atop the AVR first before making any measurements. Click to expand... Nah, at full speed Noctua claim 17.7 dB(A) noise for my AVR fans but I run those at a very much lower RPM: https://noctua.at/en/products/fan/nf-a8-pwm/specification
AcuDefTechGuy said: As silent as they are, each fan is adding 20dB of Noise. There goes the great ASR specs. When Amir does his next measurements, somebody needs to remind him to add 3 x 120mm fans atop the AVR first before making any measurements. Click to expand... Nah, at full speed Noctua claim 17.7 dB(A) noise for my AVR fans but I run those at a very much lower RPM: https://noctua.at/en/products/fan/nf-a8-pwm/specification
T TechToys2 Audioholic Oct 29, 2020 194 0 16 56 Nov 4, 2020 #162 Trebdp83 said: Processing? Who the f#%k said anything about processing? How about just passing on the video signal without f#%kin' it up? Click to expand... Speaking of which, on my Marantz, should I be turning the default video conversion setting to off?
Trebdp83 said: Processing? Who the f#%k said anything about processing? How about just passing on the video signal without f#%kin' it up? Click to expand... Speaking of which, on my Marantz, should I be turning the default video conversion setting to off?
AcuDefTechGuy Audioholic Jedi Jul 10, 2007 34,057 0 113 Nov 4, 2020 #163 Trell said: Nah, at full speed Noctua claim 17.7 dB(A) noise for my AVR fans but I run those at a very much lower RPM: https://noctua.at/en/products/fan/nf-a8-pwm/specification Click to expand... That's funny. After I wrote 20dB Noise, I was going to go back and say 18dB+ fan noise. And it's still silent. But so are all of these components being measured on ASR - all their numbers are 100% silent and inaudible. Last edited: Nov 4, 2020 Reactions: snakeeyes
Trell said: Nah, at full speed Noctua claim 17.7 dB(A) noise for my AVR fans but I run those at a very much lower RPM: https://noctua.at/en/products/fan/nf-a8-pwm/specification Click to expand... That's funny. After I wrote 20dB Noise, I was going to go back and say 18dB+ fan noise. And it's still silent. But so are all of these components being measured on ASR - all their numbers are 100% silent and inaudible.
Trell Audioholic Spartan Dec 12, 2018 7,073 0 63 ::1 Nov 4, 2020 #164 AcuDefTechGuy said: That's funny. After I wrote 20dB Noise, I was going to go back and say 18dB Noise EACH fan. Click to expand... You do know that the scale is logarithmic, with all that entails AcuDefTechGuy said: So even if each fan is adding 15dB of Noise, that's still noise you are adding. And it's still silent. But so are all of these components being measured on ASR - all their numbers are 100% silent and inaudible. Click to expand... I can't hear the added noise from the very quiet fans, does it matter? I added two fans to pull out a little heat and reduced the RPM so I could not hear them a few feet away.
AcuDefTechGuy said: That's funny. After I wrote 20dB Noise, I was going to go back and say 18dB Noise EACH fan. Click to expand... You do know that the scale is logarithmic, with all that entails AcuDefTechGuy said: So even if each fan is adding 15dB of Noise, that's still noise you are adding. And it's still silent. But so are all of these components being measured on ASR - all their numbers are 100% silent and inaudible. Click to expand... I can't hear the added noise from the very quiet fans, does it matter? I added two fans to pull out a little heat and reduced the RPM so I could not hear them a few feet away.
T Trebdp83 Audioholic Spartan Oct 27, 2009 5,805 0 36 Nov 4, 2020 #165 TechToys2 said: Speaking of which, on my Marantz, should I be turning the default video conversion setting to off? View attachment 41301 Click to expand... Having it on will convert analog video connections to HDMI so they can be output via HDMI to TV.. If you don't have any analog devices connected, you can turn it off. Not sure which model you are using so making a guess as things may have changed since I had my last Denon.
TechToys2 said: Speaking of which, on my Marantz, should I be turning the default video conversion setting to off? View attachment 41301 Click to expand... Having it on will convert analog video connections to HDMI so they can be output via HDMI to TV.. If you don't have any analog devices connected, you can turn it off. Not sure which model you are using so making a guess as things may have changed since I had my last Denon.
T TechToys2 Audioholic Oct 29, 2020 194 0 16 56 Nov 4, 2020 #166 Trebdp83 said: Having it on will convert analog video connections to HDMI so they can be output via HDMI to TV.. If you don't have any analog devices connected, you can turn it off. Not sure which model you are using so making a guess as things may have changed since I had my last Denon. Click to expand... Thanks. It's a Marantz SR6014. I don't have analog devices so I guess it doesn't matter either way. I guess I am trying to understand if the video pass through without receiver processing is something that is done by default or if there is some setting I need to change to ensure that the TV and not the receiver handles the processing?
Trebdp83 said: Having it on will convert analog video connections to HDMI so they can be output via HDMI to TV.. If you don't have any analog devices connected, you can turn it off. Not sure which model you are using so making a guess as things may have changed since I had my last Denon. Click to expand... Thanks. It's a Marantz SR6014. I don't have analog devices so I guess it doesn't matter either way. I guess I am trying to understand if the video pass through without receiver processing is something that is done by default or if there is some setting I need to change to ensure that the TV and not the receiver handles the processing?
B bommai Audioholic Intern Mar 6, 2006 49 0 8 Melbourne, Florida Nov 4, 2020 #167 Gmoney said: Just ordered another Yamaha RX V6A today. Getting it Straight from Yamaha. Click to expand... Why not the TSR-700? Sent from my iPhone using Tapatalk Pro Reactions: Gmoney
Gmoney said: Just ordered another Yamaha RX V6A today. Getting it Straight from Yamaha. Click to expand... Why not the TSR-700? Sent from my iPhone using Tapatalk Pro
T Trebdp83 Audioholic Spartan Oct 27, 2009 5,805 0 36 Nov 4, 2020 #168 TechToys2 said: Thanks. It's a Marantz SR6014. I don't have analog devices so I guess it doesn't matter either way. I guess I am trying to understand if the video pass through without receiver processing is something that is done by default or if there is some setting I need to change to ensure that the TV and not the receiver handles the processing? Click to expand... Set i/p scaler to OFF if you want the TV to handle upscaling. It should be OFF by default. Resolution should be set to AUTO by default. Reactions: TechToys2
TechToys2 said: Thanks. It's a Marantz SR6014. I don't have analog devices so I guess it doesn't matter either way. I guess I am trying to understand if the video pass through without receiver processing is something that is done by default or if there is some setting I need to change to ensure that the TV and not the receiver handles the processing? Click to expand... Set i/p scaler to OFF if you want the TV to handle upscaling. It should be OFF by default. Resolution should be set to AUTO by default.
G Gmoney Audioholic Ninja Aug 21, 2019 3,273 0 48 Nov 4, 2020 #169 bommai said: Why not the TSR-700? Sent from my iPhone using Tapatalk Pro Click to expand... I don't have a membership at Costco, and there is one about 20 miles from where I live. Plus they went back up to 599 price.
bommai said: Why not the TSR-700? Sent from my iPhone using Tapatalk Pro Click to expand... I don't have a membership at Costco, and there is one about 20 miles from where I live. Plus they went back up to 599 price.
G Gmoney Audioholic Ninja Aug 21, 2019 3,273 0 48 Nov 4, 2020 #170 AcuDefTechGuy said: No, you just did not want to put three 120mm fans on top of your AVR. Click to expand... Well you got a point, it really was about what I could Afford. I just ordered a pair of RTi a1's that will complete my whole set of RTi's, RTi a5's with the CSi 6 center channel. I had to get another TV stand cause I thought the center would fit on my old stand but It just barely fit in I couldn't remove the grill once I put center speaker in. Dam thing is huge! So now I got enough left over for extra's like upgrade speaker cable's or something else. Last edited: Nov 4, 2020
AcuDefTechGuy said: No, you just did not want to put three 120mm fans on top of your AVR. Click to expand... Well you got a point, it really was about what I could Afford. I just ordered a pair of RTi a1's that will complete my whole set of RTi's, RTi a5's with the CSi 6 center channel. I had to get another TV stand cause I thought the center would fit on my old stand but It just barely fit in I couldn't remove the grill once I put center speaker in. Dam thing is huge! So now I got enough left over for extra's like upgrade speaker cable's or something else.
G Gmoney Audioholic Ninja Aug 21, 2019 3,273 0 48 Nov 4, 2020 #171 Xerith said: I’m trying to decide between a Sony str-dh790 and a str-dn1080. Local Best Buy has both of them. I know the 1080 has a lot of bling the 790 doesn’t. Any other receivers I should be looking at around that same price range? My current speakers are 8 ohms 140w. Click to expand... Pickings are getting very slim to none! Unless you wanta spend upwards of 2k or more plenty of those that the rich and famous buy all the time. Them new Yamaha AVR's are going as fast as they get them in. Denon and Marantz are getting to be slim pickings also. It just really came down for me as I didn't want to spend close to 1k on a AVR I've spent soooo much on AVR's in the past 10 years I could've got a nice use car or truck. Just wanted a Modest set up that's good enough not trying to chase the last one percent anymore. Last edited: Nov 4, 2020
Xerith said: I’m trying to decide between a Sony str-dh790 and a str-dn1080. Local Best Buy has both of them. I know the 1080 has a lot of bling the 790 doesn’t. Any other receivers I should be looking at around that same price range? My current speakers are 8 ohms 140w. Click to expand... Pickings are getting very slim to none! Unless you wanta spend upwards of 2k or more plenty of those that the rich and famous buy all the time. Them new Yamaha AVR's are going as fast as they get them in. Denon and Marantz are getting to be slim pickings also. It just really came down for me as I didn't want to spend close to 1k on a AVR I've spent soooo much on AVR's in the past 10 years I could've got a nice use car or truck. Just wanted a Modest set up that's good enough not trying to chase the last one percent anymore.
B bommai Audioholic Intern Mar 6, 2006 49 0 8 Melbourne, Florida Nov 4, 2020 #172 Gmoney said: I don't have a membership at Costco, and there is one about 20 miles from where I live. Plus they went back up to 599 price. Click to expand... It is $399 online right now. Sent from my iPhone using Tapatalk Pro Reactions: Gmoney
Gmoney said: I don't have a membership at Costco, and there is one about 20 miles from where I live. Plus they went back up to 599 price. Click to expand... It is $399 online right now. Sent from my iPhone using Tapatalk Pro
B bommai Audioholic Intern Mar 6, 2006 49 0 8 Melbourne, Florida Nov 4, 2020 #173 I will see if I should be concerned. Today I could get get our wii to play properly via receiver. I have it connected through a hdmi adapter. It worked fine last weekend but today it cuts in and out. Nothing changed. Sent from my iPhone using Tapatalk Pro Reactions: Gmoney
I will see if I should be concerned. Today I could get get our wii to play properly via receiver. I have it connected through a hdmi adapter. It worked fine last weekend but today it cuts in and out. Nothing changed. Sent from my iPhone using Tapatalk Pro
G Gmoney Audioholic Ninja Aug 21, 2019 3,273 0 48 Nov 4, 2020 #174 bommai said: It is $399 online right now. Sent from my iPhone using Tapatalk Pro Click to expand... Really? I had been checking since Sunday it kept saying out of stock. Dam da bad luck again!
bommai said: It is $399 online right now. Sent from my iPhone using Tapatalk Pro Click to expand... Really? I had been checking since Sunday it kept saying out of stock. Dam da bad luck again!
little wing Audioholic General Sep 4, 2005 1,174 0 63 Nov 4, 2020 #175 lovinthehd said: Then again who cares about an avr's video processing? Click to expand... Exactly, all I want my AVR to do is pass through the signal as is wether it's 1080p, 4k or HDR Reactions: Gmoney and lovinthehd
lovinthehd said: Then again who cares about an avr's video processing? Click to expand... Exactly, all I want my AVR to do is pass through the signal as is wether it's 1080p, 4k or HDR
lovinthehd Audioholic Jedi Sep 11, 2012 44,872 0 113 Oakridge, OR Nov 4, 2020 #176 little wing said: Exactly, all I want my AVR to do is pass through the signal as is wether it's 1080p, 4k or HDR Click to expand... Yep....but would be nice to see how clean that pass-thru is I suppose....if his gear has that capability....
little wing said: Exactly, all I want my AVR to do is pass through the signal as is wether it's 1080p, 4k or HDR Click to expand... Yep....but would be nice to see how clean that pass-thru is I suppose....if his gear has that capability....
little wing Audioholic General Sep 4, 2005 1,174 0 63 Nov 4, 2020 #177 lovinthehd said: Yep....but would be nice to see how clean that pass-thru is I suppose....if his gear has that capability.... Click to expand... Yep, definitely. The 3060 passes through a pristine 4k image. Obviously all video processing is turned off. Reactions: snakeeyes
lovinthehd said: Yep....but would be nice to see how clean that pass-thru is I suppose....if his gear has that capability.... Click to expand... Yep, definitely. The 3060 passes through a pristine 4k image. Obviously all video processing is turned off.
lovinthehd Audioholic Jedi Sep 11, 2012 44,872 0 113 Oakridge, OR Nov 4, 2020 #178 little wing said: Yep, definitely. The 3060 passes through a pristine 4k image. Obviously all video processing is turned off. Click to expand... The hope would be on pass-thru that the signal would be minimally affected....but what's an acceptable range even?
little wing said: Yep, definitely. The 3060 passes through a pristine 4k image. Obviously all video processing is turned off. Click to expand... The hope would be on pass-thru that the signal would be minimally affected....but what's an acceptable range even?
little wing Audioholic General Sep 4, 2005 1,174 0 63 Nov 4, 2020 #179 lovinthehd said: The hope would be on pass-thru that the signal would be minimally affected....but what's an acceptable range even? Click to expand... Yeah that's a good question, I guess an acceptable range would be that you can't tell the difference between running your video through an AVR or direct to your TV. I'm not a measurements guy at all.
lovinthehd said: The hope would be on pass-thru that the signal would be minimally affected....but what's an acceptable range even? Click to expand... Yeah that's a good question, I guess an acceptable range would be that you can't tell the difference between running your video through an AVR or direct to your TV. I'm not a measurements guy at all.
AcuDefTechGuy Audioholic Jedi Jul 10, 2007 34,057 0 113 Nov 4, 2020 #180 Gmoney said: Well you got a point, it really was about what I could Afford. I just ordered a pair of RTi a1's that will complete my whole set of RTi's, RTi a5's with the CSi 6 center channel. I had to get another TV stand cause I thought the center would fit on my old stand but It just barely fit in I couldn't remove the grill once I put center speaker in. Dam thing is huge! So now I got enough left over for extra's like upgrade speaker cable's or something else. View attachment 41310View attachment 41311 Click to expand... Looking good. As soon as you get those 2 Atmos speakers installed and enjoy all those awesome Atmos movies (like Oblivion), you are absolutely complete! Then it will no longer be about finding that great system. It will be about finding all the great movies, TV shows (GOT 4K Atmos), and Music (NeuralX). Reactions: Gmoney
Gmoney said: Well you got a point, it really was about what I could Afford. I just ordered a pair of RTi a1's that will complete my whole set of RTi's, RTi a5's with the CSi 6 center channel. I had to get another TV stand cause I thought the center would fit on my old stand but It just barely fit in I couldn't remove the grill once I put center speaker in. Dam thing is huge! So now I got enough left over for extra's like upgrade speaker cable's or something else. View attachment 41310View attachment 41311 Click to expand... Looking good. As soon as you get those 2 Atmos speakers installed and enjoy all those awesome Atmos movies (like Oblivion), you are absolutely complete! Then it will no longer be about finding that great system. It will be about finding all the great movies, TV shows (GOT 4K Atmos), and Music (NeuralX).
