D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 7, 2019 #61 mtrycrafts said: Looking great so far. Hope you pre-wired for most possibilities. Hate to see a remodel job not far off. Click to expand... Hopefully I did I've got all pre wiring done and I pray I covered all possibilities I just got done remodeling this dang thing another one would kill me!
mtrycrafts said: Looking great so far. Hope you pre-wired for most possibilities. Hate to see a remodel job not far off. Click to expand... Hopefully I did I've got all pre wiring done and I pray I covered all possibilities I just got done remodeling this dang thing another one would kill me!
mtrycrafts Seriously, I have no life. Aug 19, 2004 23,548 0 113 Sep 8, 2019 #62 Danzilla31 said: Hopefully I did I've got all pre wiring done and I pray I covered all possibilities I just got done remodeling this dang thing another one would kill me! Click to expand... Well, it will be very frustrating, certainly not kill you unless a hidden beam crushes you. Reactions: Danzilla31
Danzilla31 said: Hopefully I did I've got all pre wiring done and I pray I covered all possibilities I just got done remodeling this dang thing another one would kill me! Click to expand... Well, it will be very frustrating, certainly not kill you unless a hidden beam crushes you.
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 8, 2019 #63 mtrycrafts said: Well, it will be very frustrating, certainly not kill you unless a hidden beam crushes you. Click to expand... I'd go out a happy man working on my audio
mtrycrafts said: Well, it will be very frustrating, certainly not kill you unless a hidden beam crushes you. Click to expand... I'd go out a happy man working on my audio
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 10, 2019 #64 Ok all electrical lighting ceiling and pre wiring is done starting tommorow will begin the actual equipment getting installed Here's a few pics of the final build next time I post it should be with the theater setup and running Reactions: CB22, Alex2507, ellisr63 and 1 other person
Ok all electrical lighting ceiling and pre wiring is done starting tommorow will begin the actual equipment getting installed Here's a few pics of the final build next time I post it should be with the theater setup and running
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 11, 2019 #65 IT HAS BEGUN!!!! Reactions: Trell, shadyJ, snakeeyes and 1 other person
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 13, 2019 #66 Almost done! Reactions: afterlife2 and snakeeyes
afterlife2 Audioholic Warlord Oct 7, 2011 9,980 0 113 Sep 13, 2019 #67 Danzilla31 said: Almost done! View attachment 31227View attachment 31228 View attachment 31229View attachment 31230View attachment 31231 View attachment 31232View attachment 31233View attachment 31234 Click to expand... Wow looking great there dude. I'm jealous of you. What state are you in?
Danzilla31 said: Almost done! View attachment 31227View attachment 31228 View attachment 31229View attachment 31230View attachment 31231 View attachment 31232View attachment 31233View attachment 31234 Click to expand... Wow looking great there dude. I'm jealous of you. What state are you in?
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 13, 2019 #68 afterlife2 said: Wow looking great there dude. I'm jealous of you. What state are you in? Click to expand... Thank you! I'm down here in good ol Texas here in San Antonio.
afterlife2 said: Wow looking great there dude. I'm jealous of you. What state are you in? Click to expand... Thank you! I'm down here in good ol Texas here in San Antonio.
William Lemmerhirt Audioholic Overlord Jan 8, 2017 12,005 0 113 52 Sep 13, 2019 #69 Danzilla31 said: Thank you! I'm down here in good ol Texas here in San Antonio. Click to expand... I’ve been to DFW area. Really nice experience. Texans are almost as “nice” as Minnesotans! Dan, did you call SVS by chance? There are many diagrams available to illustrate how to do it. Just wondering what their thoughts were. I still think it’s the way to go.
Danzilla31 said: Thank you! I'm down here in good ol Texas here in San Antonio. Click to expand... I’ve been to DFW area. Really nice experience. Texans are almost as “nice” as Minnesotans! Dan, did you call SVS by chance? There are many diagrams available to illustrate how to do it. Just wondering what their thoughts were. I still think it’s the way to go.
Pogre Audioholic Slumlord Jul 29, 2016 16,146 0 113 56 Mesa, Arizona Sep 13, 2019 #70 Bucknekked said: Interesting. My dogs hate the subwoofers too. When they come on, for either music or movies, they bail or start barking. Click to expand... My dogs are so used to them that they'll sleep right through music, even when I bump it up a little. Deep bass will get Loki in my lap tho. I don't viciously crank it very often if they're inside. They do have a limit and it makes me feel bad, lol. Reactions: Bucknekked
Bucknekked said: Interesting. My dogs hate the subwoofers too. When they come on, for either music or movies, they bail or start barking. Click to expand... My dogs are so used to them that they'll sleep right through music, even when I bump it up a little. Deep bass will get Loki in my lap tho. I don't viciously crank it very often if they're inside. They do have a limit and it makes me feel bad, lol.
Pogre Audioholic Slumlord Jul 29, 2016 16,146 0 113 56 Mesa, Arizona Sep 13, 2019 #71 Danzilla31 said: Thank you! I'm down here in good ol Texas here in San Antonio. Click to expand... My mom and sister live in New Braunfels. I've been there to visit and in San Antonio more than once in my travels. Was it you in another thread that said you'd been to Bjorn's? I had a great time there and the people were super friendly. The sales rep didn't act all snooty and was more than happy to let me sit and listen to their flagship setup. B&W 802D3s powered by a stack of McIntosh gear properly set up in a treated room. Best sounding system I've ever heard.
Danzilla31 said: Thank you! I'm down here in good ol Texas here in San Antonio. Click to expand... My mom and sister live in New Braunfels. I've been there to visit and in San Antonio more than once in my travels. Was it you in another thread that said you'd been to Bjorn's? I had a great time there and the people were super friendly. The sales rep didn't act all snooty and was more than happy to let me sit and listen to their flagship setup. B&W 802D3s powered by a stack of McIntosh gear properly set up in a treated room. Best sounding system I've ever heard.
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 13, 2019 #72 William Lemmerhirt said: I’ve been to DFW area. Really nice experience. Texans are almost as “nice” as Minnesotans! Dan, did you call SVS by chance? There are many diagrams available to illustrate how to do it. Just wondering what their thoughts were. I still think it’s the way to go. Click to expand... Yes they said definetly don't parallel them unless you know for a fact that your amp is stable down in 2 or 3ohms but they recommended a rca y splitter just split that into 2 signals and connect the 2nd signal into a separate amp. I think that may be the way to go. I like that better what do you think I have some 4 crown xls drive core 2's or I'd probably just buy a 5 channel like an outlaw 5000 and do it that way. What do you think the installer is kind off balking about it right now the dealer Is Of have to pay extra on the wiring and the install they don't have enough which I get its all pre wired plus I may void my warranty on the anthem if I rig them that way in series or parallel I don't want to screw with that so what I'm going to do is split the difference between the 2 rows elevate 2 of the SVS prime towers because they do have excellent dispersion and then see if I like that but if not you and me are wiring them b@$!#es either in series or with a signal split from the processor into a separate amp I'll get back with you on that one
William Lemmerhirt said: I’ve been to DFW area. Really nice experience. Texans are almost as “nice” as Minnesotans! Dan, did you call SVS by chance? There are many diagrams available to illustrate how to do it. Just wondering what their thoughts were. I still think it’s the way to go. Click to expand... Yes they said definetly don't parallel them unless you know for a fact that your amp is stable down in 2 or 3ohms but they recommended a rca y splitter just split that into 2 signals and connect the 2nd signal into a separate amp. I think that may be the way to go. I like that better what do you think I have some 4 crown xls drive core 2's or I'd probably just buy a 5 channel like an outlaw 5000 and do it that way. What do you think the installer is kind off balking about it right now the dealer Is Of have to pay extra on the wiring and the install they don't have enough which I get its all pre wired plus I may void my warranty on the anthem if I rig them that way in series or parallel I don't want to screw with that so what I'm going to do is split the difference between the 2 rows elevate 2 of the SVS prime towers because they do have excellent dispersion and then see if I like that but if not you and me are wiring them b@$!#es either in series or with a signal split from the processor into a separate amp I'll get back with you on that one
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 13, 2019 #73 Pogre said: My mom and sister live in New Braunfels. I've been there to visit and in San Antonio more than once in my travels. Was it you in another thread that said you'd been to Bjorn's? I had a great time there and the people were super friendly. The sales rep didn't act all snooty and was more than happy to let me sit and listen to their flagship setup. B&W 802D3s powered by a stack of McIntosh gear properly set up in a treated room. Best sounding system I've ever heard. Click to expand... They are a great store dude you come up to visit your family hit me up Reactions: Pogre
Pogre said: My mom and sister live in New Braunfels. I've been there to visit and in San Antonio more than once in my travels. Was it you in another thread that said you'd been to Bjorn's? I had a great time there and the people were super friendly. The sales rep didn't act all snooty and was more than happy to let me sit and listen to their flagship setup. B&W 802D3s powered by a stack of McIntosh gear properly set up in a treated room. Best sounding system I've ever heard. Click to expand... They are a great store dude you come up to visit your family hit me up
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 13, 2019 #74 Same goes to you Will you ever in this area hit me up
William Lemmerhirt Audioholic Overlord Jan 8, 2017 12,005 0 113 52 Sep 13, 2019 #75 Danzilla31 said: Yes they said definetly don't parallel them unless you know for a fact that your amp is stable down in 2 or 3ohms but they recommended a rca y splitter just split that into 2 signals and connect the 2nd signal into a separate amp. I think that may be the way to go. I like that better what do you think I have some 4 crown xls drive core 2's or I'd probably just buy a 5 channel like an outlaw 5000 and do it that way. What do you think the installer is kind off balking about it right now the dealer Is Of have to pay extra on the wiring and the install they don't have enough which I get its all pre wired plus I may void my warranty on the anthem if I rig them that way in series or parallel I don't want to screw with that so what I'm going to do is split the difference between the 2 rows elevate 2 of the SVS prime towers because they do have excellent dispersion and then see if I like that but if not you and me are wiring them b@$!#es either in series or with a signal split from the processor into a separate amp I'll get back with you on that one Click to expand... I think the preout to amp is the best thing to do. I was thinking in the meantime try it in parallel or series off the same amp to try but the long run solution is a separate amp. I guess I think now is the time to wire it and do it. Why is the installer balking? People do this all the time. Or is it because he doesn’t wanna pull wire? Reactions: Danzilla31
Danzilla31 said: Yes they said definetly don't parallel them unless you know for a fact that your amp is stable down in 2 or 3ohms but they recommended a rca y splitter just split that into 2 signals and connect the 2nd signal into a separate amp. I think that may be the way to go. I like that better what do you think I have some 4 crown xls drive core 2's or I'd probably just buy a 5 channel like an outlaw 5000 and do it that way. What do you think the installer is kind off balking about it right now the dealer Is Of have to pay extra on the wiring and the install they don't have enough which I get its all pre wired plus I may void my warranty on the anthem if I rig them that way in series or parallel I don't want to screw with that so what I'm going to do is split the difference between the 2 rows elevate 2 of the SVS prime towers because they do have excellent dispersion and then see if I like that but if not you and me are wiring them b@$!#es either in series or with a signal split from the processor into a separate amp I'll get back with you on that one Click to expand... I think the preout to amp is the best thing to do. I was thinking in the meantime try it in parallel or series off the same amp to try but the long run solution is a separate amp. I guess I think now is the time to wire it and do it. Why is the installer balking? People do this all the time. Or is it because he doesn’t wanna pull wire?
William Lemmerhirt Audioholic Overlord Jan 8, 2017 12,005 0 113 52 Sep 13, 2019 #76 Danzilla31 said: Same goes to you Will you ever in this area hit me up Click to expand... You know it brother.
Danzilla31 said: Same goes to you Will you ever in this area hit me up Click to expand... You know it brother.
2 2channel lover Audioholic Field Marshall Jan 5, 2017 1,840 0 113 60 Sep 13, 2019 #77 Danzilla31 said: Thank you! I'm down here in good ol Texas here in San Antonio. Click to expand... Looking great brother! You're close now for sure! Congrats...I've been in that 98 in the shade back in the day... had family stationed at Lackland AFB...I think that's TX right? They were are so at many AFBs. Reactions: Danzilla31
Danzilla31 said: Thank you! I'm down here in good ol Texas here in San Antonio. Click to expand... Looking great brother! You're close now for sure! Congrats...I've been in that 98 in the shade back in the day... had family stationed at Lackland AFB...I think that's TX right? They were are so at many AFBs.
Pogre Audioholic Slumlord Jul 29, 2016 16,146 0 113 56 Mesa, Arizona Sep 13, 2019 #78 Danzilla31 said: Yes they said definetly don't parallel them unless you know for a fact that your amp is stable down in 2 or 3ohms but they recommended a rca y splitter just split that into 2 signals and connect the 2nd signal into a separate amp. I think that may be the way to go. I like that better what do you think I have some 4 crown xls drive core 2's or I'd probably just buy a 5 channel like an outlaw 5000 and do it that way. What do you think the installer is kind off balking about it right now the dealer Is Of have to pay extra on the wiring and the install they don't have enough which I get its all pre wired plus I may void my warranty on the anthem if I rig them that way in series or parallel I don't want to screw with that so what I'm going to do is split the difference between the 2 rows elevate 2 of the SVS prime towers because they do have excellent dispersion and then see if I like that but if not you and me are wiring them b@$!#es either in series or with a signal split from the processor into a separate amp I'll get back with you on that one Click to expand... Bill also mentioned wiring in series. Instead of halving impedance wiring in series will double the impedance (16 ohm instead of 4). That's how I understand it anyway. Bill can probably explain better. *Edit: @William Lemmerhirt, could he wire both sets in series, then run those together in parallel and have an end result of 8 ohms?
Danzilla31 said: Yes they said definetly don't parallel them unless you know for a fact that your amp is stable down in 2 or 3ohms but they recommended a rca y splitter just split that into 2 signals and connect the 2nd signal into a separate amp. I think that may be the way to go. I like that better what do you think I have some 4 crown xls drive core 2's or I'd probably just buy a 5 channel like an outlaw 5000 and do it that way. What do you think the installer is kind off balking about it right now the dealer Is Of have to pay extra on the wiring and the install they don't have enough which I get its all pre wired plus I may void my warranty on the anthem if I rig them that way in series or parallel I don't want to screw with that so what I'm going to do is split the difference between the 2 rows elevate 2 of the SVS prime towers because they do have excellent dispersion and then see if I like that but if not you and me are wiring them b@$!#es either in series or with a signal split from the processor into a separate amp I'll get back with you on that one Click to expand... Bill also mentioned wiring in series. Instead of halving impedance wiring in series will double the impedance (16 ohm instead of 4). That's how I understand it anyway. Bill can probably explain better. *Edit: @William Lemmerhirt, could he wire both sets in series, then run those together in parallel and have an end result of 8 ohms?
D Danzilla31 Audioholic Spartan May 17, 2018 7,179 0 113 52 Sep 13, 2019 #79 William Lemmerhirt said: I think the preout to amp is the best thing to do. I was thinking in the meantime try it in parallel or series off the same amp to try but the long run solution is a separate amp. I guess I think now is the time to wire it and do it. Why is the installer balking? People do this all the time. Or is it because he doesn’t wanna pull wire? Click to expand... He'll do it next week he has to come back and I'm going to make him do it the more I think about it the more I like the idea
William Lemmerhirt said: I think the preout to amp is the best thing to do. I was thinking in the meantime try it in parallel or series off the same amp to try but the long run solution is a separate amp. I guess I think now is the time to wire it and do it. Why is the installer balking? People do this all the time. Or is it because he doesn’t wanna pull wire? Click to expand... He'll do it next week he has to come back and I'm going to make him do it the more I think about it the more I like the idea
Pogre Audioholic Slumlord Jul 29, 2016 16,146 0 113 56 Mesa, Arizona Sep 13, 2019 #80 Danzilla31 said: He'll do it next week he has to come back and I'm going to make him do it the more I think about it the more I like the idea Click to expand... That's probably is the more stable way to go actually.
Danzilla31 said: He'll do it next week he has to come back and I'm going to make him do it the more I think about it the more I like the idea Click to expand... That's probably is the more stable way to go actually.
