Dayton 18" HO Ported Build Thread

[1Randy]

It is about the same size as the picture you posted.

The one below will do the job in a smaller cabinet.

Thank you TLSGuy

The pic of My size limit I posted was around (6.8 cu/ft outer Dimentions)

....There are No 15" Drivers up to $750 that can do better than this 12" RSS315HF ?
...Isn't the Sereo Integrity SQL15" good for my size limit. ?

 

[TLS Guy]

Thank you TLSGuy

The pic of My size limit I posted was around (6.8 cu/ft outer Dimentions)

....There are No 15" Drivers up to $750 that can do better than this 12" RSS315HF ?
...Isn't the Sereo Integrity SQL15" good for my size limit. ?

No the Dayton is much better. That stereo integrity is a car driver. These are very different animals and have a skewed response for vehicle cab gain.

If you are serious about building a decent sub, then go ahead with the model I have attached. My data is reliable. Those graphs will tell you precisely what you can expect.

 

[1Randy]

No the Dayton is much better. That stereo integrity is a car driver. These are very different animals and have a skewed response for vehicle cab gain.

If you are serious about building a decent sub, then go ahead with the model I have attached. My data is reliable. Those graphs will tell you precisely what you can expect.

...I notices some of the t/s parameter have changed ?

 

[TLS Guy]

...I notices some of the t/s parameter have changed ?

I will have to update the model. They really should have given it a different model number, but I suspect the results will not be drastically different.

 

[1Randy]

I will have to update the model. They really should have given it a different model number, but I suspect the results will not be drastically different.

Ok,j...ust curious if you have ever tried modeling this model

 

[TLS Guy]

Ok,j...ust curious if you have ever tried modeling this model

No.

 

[1Randy]

No.

Ok

 

[Verdinut]

Ok

I entirely agree with @Tlsguy and I suggest that you get a pair of RSS315 HF-4 subwoofers. Actually, several years ago I built a pair of 3-way tower speakers using these 12 inch drivers as woofers. These work pretty well and you should not be disappointed with their performance. Dayton RSS series subs are really outstanding!

 

[1Randy]

I entirely agree with @Tlsguy and I suggest that you get a pair of RSS315 HF-4 subwoofers. Actually, several years ago I built a pair of 3-way tower speakers using these 12 inch drivers as woofers. These work pretty well and you should not be disappointed with their performance. Dayton RSS series subs are really outstanding!

Mine would be for HT duty