Dayton 18" HO Ported Build Thread

[1Randy]

It is about the same size as the picture you posted.

The one below will do the job in a smaller cabinet.

Thank you TLSGuy

The pic of My size limit I posted was around (6.8 cu/ft outer Dimentions)

....There are No 15" Drivers up to $750 that can do better than this 12" RSS315HF ?
...Isn't the Sereo Integrity SQL15" good for my size limit. ?

 

[TLS Guy]

Thank you TLSGuy

The pic of My size limit I posted was around (6.8 cu/ft outer Dimentions)

....There are No 15" Drivers up to $750 that can do better than this 12" RSS315HF ?
...Isn't the Sereo Integrity SQL15" good for my size limit. ?

No the Dayton is much better. That stereo integrity is a car driver. These are very different animals and have a skewed response for vehicle cab gain.

If you are serious about building a decent sub, then go ahead with the model I have attached. My data is reliable. Those graphs will tell you precisely what you can expect.

 

[1Randy]

No the Dayton is much better. That stereo integrity is a car driver. These are very different animals and have a skewed response for vehicle cab gain.

If you are serious about building a decent sub, then go ahead with the model I have attached. My data is reliable. Those graphs will tell you precisely what you can expect.

...I notices some of the t/s parameter have changed ?

 

[TLS Guy]

...I notices some of the t/s parameter have changed ?

I will have to update the model. They really should have given it a different model number, but I suspect the results will not be drastically different.

 

[1Randy]

I will have to update the model. They really should have given it a different model number, but I suspect the results will not be drastically different.

Ok,j...ust curious if you have ever tried modeling this model