Yamaha AVENTAGE 2021 AV Receivers Bulk Up on Power and 8K Features

William Lemmerhirt

William Lemmerhirt

Audioholic Overlord
After 16hz, it’s just greed. :p
Yes! Exactly. My checkbook stopped at about 14.5hz. Ugh… been squirreling away though. I can fit four devastators, and afforded it!
Probably not as easy as my wife can fit her foot up my a$$ though…..
 
ryanosaur

ryanosaur

Audioholic Overlord
You only need one Dev, with the Eminence NSW 21”.
Then you need a 24” SI.
:)
DIY… that’ll be about 2k for the drivers. 3-400 to build the cabinets. Then you just need a power plant. :D
 
Last edited:
William Lemmerhirt

William Lemmerhirt

Audioholic Overlord
You not need one Dev, with the Eminence NSW 21”.
Then you need a 24” SI.
:)
DIY… that’ll be about 2k for the drivers. 3-400 to build the cabinets. Then you just need a power plant. :D

I was thinking of four 18’s but a couple 24” would be STOOPID!!!!
The hard part is mamma, but the build sheet I proposed is much easier to digest than a pair of fv25’s. Or four fv18’s.
Still. It IS my LR so I have to find a somewhat elegant solution.
 
clone1008

clone1008

Full Audioholic
After 16hz, it’s just greed. :p
Wall Street
“Greed, for lack of a better word, is good. Greed is right. Greed works. Greed clarifies and cuts through to the essence of the evolutionary spirit.” – Gordon Gekko (Michael Douglas)
 
William Lemmerhirt

William Lemmerhirt

Audioholic Overlord
Wall Street
“Greed, for lack of a better word, is good. Greed is right. Greed works. Greed clarifies and cuts through to the essence of the evolutionary spirit.” – Gordon Gekko (Michael Douglas)
I believe there’s a single word to describe this very thing. It is…
MOAR!!!
 
Last edited:
Replicant 7

Replicant 7

Audioholic Samurai
You should share with others what you did to get it to work. Unless of course like Gene's review it's Top Secret Ravioli. ;)
I feel like a dumba$$ , really very easy. You see where it says, Menu (connect) can't miss it but my dumba$$ did!:rolleyes: So umm yeah I likea Music cast now!! :D
It tells you to hold it for 5 seconds. I was holding in the select for 5 seconds all this time. :D As your holding the (connect) it beeps five times than in big letters on the display it says connected!
IMG_20211219_084630801~2.jpg
 
Last edited:
clone1008

clone1008

Full Audioholic
I feel like a dumba$$ , really very easy. You see where it says, Menu (connect) can't miss it but my dumba$$ did!:rolleyes: So umm yeah I likea Music cast now!! :D
It tells you to hold it for 5 seconds. I was hold in the select enough for 5 seconds all this time. :D
View attachment 52450
I was going to suggest it was probably an ID (10) T error but I left it alone... :oops:
 
Replicant 7

Replicant 7

Audioholic Samurai
I was going to suggest it was probably an ID (10) T error but I left it alone... :oops:
Funny thing is, other's where trying to figure out the other settings in the menu, I got, but missed that lil (connect) at the bottom..:D
 
clone1008

clone1008

Full Audioholic
Funny thing is, other's where trying to figure out the other settings in the menu, I got, but missed that lil (connect) at the bottom..:D
Sometimes it's the simplest things that become the biggest issues.
 
AcuDefTechGuy

AcuDefTechGuy

Audioholic Jedi
I feel like a dumba$$ , really very easy. You see where it says, Menu (connect) can't miss it but my dumba$$ did!:rolleyes: So umm yeah I likea Music cast now!! :D
It tells you to hold it for 5 seconds. I was holding in the select for 5 seconds all this time. :D As you hold the (connect) it beeps five times than in big letters on the display it says connected!
View attachment 52450
Welcome to the MusicCast Club, Mike! :D

Best WiFi Remote and Music Streaming app in the whole wide world. :D

Meanwhile, I am waiting on Yamaha to release the CX-A5300 or whatever they call it next (CX-A9A ?) so I can "upgrade" my CX-A5100. :D
 
TheLamonster

TheLamonster

Audioholic Intern
No.
You never want to connect both outputs from the AVR to a single Sub.
To clarify, you run a single output to a "Y" splitter, plugging Both Ends of the "Y," 1 each, into the L and R Inputs on the Plate Amp of the Sub.
Yep, this ^

I agree that it's not worth it if your output is fine, but I was having issues on A8A and this resolved them.
 
S

snakeeyes

Audioholic Ninja
Welcome to the MusicCast Club, Mike! :D

Best WiFi Remote and Music Streaming app in the whole wide world. :D

Meanwhile, I am waiting on Yamaha to release the CX-A5300 or whatever they call it next (CX-A9A ?) so I can "upgrade" my CX-A5100. :D
Think something like the 5300 would work for me as well in a few years after the dust settles on HDMI 2.1... Not in a hurry though. I don’t use PS5 or Xbox. :)
 
AcuDefTechGuy

AcuDefTechGuy

Audioholic Jedi
Think something like the 5300 would work for me as well in a few years after the dust settles on HDMI 2.1... Not in a hurry though. I don’t use PS5 or Xbox. :)
What's the REAL reason you're thinking of upgrading?

I don't really have a real reason to upgrade from my CX-A5100 other than to be able to rename my Scenes on MusicCast like on the RX-A3080 and probably CX-A5200 and newer models. :D
 
clone1008

clone1008

Full Audioholic
Think something like the 5300 would work for me as well in a few years after the dust settles on HDMI 2.1... Not in a hurry though. I don’t use PS5 or Xbox. :)
Not sure if it will ever settle according to this article...
 
panteragstk

panteragstk

Audioholic Warlord
Not sure if it will ever settle according to this article...
A lot of other HDMI revisions had similar issues. HDMI is just a garbage standard in general, but companies being shady about versioning sure doesn't help.
 

Latest posts

newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top