No, that's got them a bit too hot. Your Subwoofer range is –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps (see Page 52 in your manual). So the gain on your Sub is too high as Audyssey can't pull it down, as it's probably up against the limits at –15.0dB. Just rotate the gain on each Sub down 25° and re-run Audyssey. Try to get them away from the limit more towards 0dB. It doesn't have to be exact.\n\nLater, after you've got it setup, you can tweak the Sub if you find you want more. By the way, what are the crossover settings you are going with for the speakers? Typically folks should set their speakers to small and start with 80Hz.\n\nI hope this is helpful.\n\nWow thanks for the information , I have such trouble reading guides. If they explain it I cannot find it, my fronts are 80hz I adjusted it after xt32 set them at 40hz. I can get pics of the other x overs . I literally got unlucky had the model right below multi sub eq, so I gotta eq it myself kinda?\nI had subs same exact volume as each other last xt32run.