http://www.hometheatermag.com/floorloudspeakers/1004paradigm/index2.html
http://www.hometheatermag.com/floorloudspeakers/1005bw/index2.html
From HT Mag regarding the Paradigm S8:
Freq Resp: 42 Hz - 20 kHz +/-3dB On-Axis
Drivers: 1 Tweeter, 1 Midrange, 4 Woofers
"Bass is one of the first things you'll notice about the S8s—as in, there's a lot of it, even by large tower standards. I'd expect no less from a speaker that has four drivers dedicated to lower frequencies alone, but the really impressive part was how the S8s created such powerful, punchy bass without sounding boomy or muddy."
Please explain to me how can you get A LOT OF BASS if the frequency response only goes down to 42 Hz @ -3dB?
"Powerful, punchy bass without sounding boomy or muddy" is fine, but only @ 42 Hz?
That doesn't seem very impressive.
I think it would be impressive if it can produce powerful, punchy bass without sounding boomy or muddy @ 20 Hz, NOT @ 42 Hz?
How can bass possibly sound "BOOMY" @ 42 Hz to begin with?
Tom Nouisane:
BOSE AM-15 System MSRP $1,399
SATELLITES
Frequency Response:..... 280 Hz to 13.3 kHz ±10.5 dB
BASS MODULE
Frequency Response:.... 46 Hz to 202 Hz ±2.3 dB
Now, of course, I would never compare the Bose to anything here, but I'm just trying to say that at 42 Hz, I just don't see how the S8 could possibly produce enough LOW BASS to be BOOMY or muddy to begin with.
Another question:
It's my impression that the Midrange is the most important, right?
Most of the sound we hear will be in the midrange, right?
We have the subwoofers for the LOW frequencies, and we usually don't hear very much frequencies above 16 kHz, right?
So the most important driver is the Midrange.
So why does the S8 have only ONE Midrange driver and FOUR Woofers?
Are they saying that the FOUR Woofers are more important?
If so, why can they only produce 42Hz @ -3dB from these 4 woofers?
I'm just thinking out loud, so please help me understand the reasoning.
Oh, by the way, the B&W 803D on-axis: 46 Hz - 20 kHz +/- 3dB.
Okay, I got my helmet.