My review is Posted!!
http://www.audioholics.com/reviews/receivers/rx-z7-7.1
No more whining about it being late.
Excellents, thanks for the through review! I'm also very happy to see that there are more firmware updates coming, even though I haven't suffered from blue lines/sparkles (running 1.04 fw).
As you link to Yamaha's RX-Z7 products page for updates, do you know if Yamaha has just updated their 1.05 firmware which was available earlier, or does this new firmware get new version number too?
However I found this part of the crossover settings intresting...:
As was the case with the RX-Z11, the RX-Z7 provides for variable crossover settings per speaker group (ie. Mains, Center, Surrounds but doesn't give you a choice for the subwoofer crossover which I found through my testing to be dependent on the main channel crossover setting.
I would assume subwoofer crossover would be highest setting used in different speaker groups. At least I think it would be most logical choice.
For example if I were to use 60Hz for main speakers, 80hz for center and 100Hz for surrounds and rears, subwoofer would produce the sum of LFE, <60Hz from mains, <80Hz from center and <100Hz from surrounds and rears, not just LFE and <60Hz from all speakers..?
Also is it possible to have PLIIz as fw update for Z7/Z11, as they are products of flagship line? I know that Dolby PLIIz is mainly targeted for gamers, but it would still be nice to know that the capability is there. This or atleast their own presence speaker layout would require Z7 to allow more than 8 "speaker outputs"...:
Because of this, you can run a full fledged 7.1 system in the main zone while simultaneously serving music in three other zones all powered by external amplification.
... does it to the same for presence and surr. back speakers? EDIT: Nevermind...

, I just read this to be one of the suggestions for improvement in the review.