MrBoat said:
So then, what is the best way to get 2-channel audio with bass management and variable crossover settings if not with an AVR? I don't recall seeing a lot of features such as sub outs on most 2-channel integrated amps. What about with passive subs? As much as I like my full range speakers, I still like to use subs for what they do well in my 2-channel system.
I haven't looked at amps in a while because I haven't needed to.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sub out can mean a few thing. One is the cut point and the other is if it has a stepped signal. I don't use a modified signal
from the source in 2 channel stereo reproduction or from a preamp. If the source has an enhanced bass track (like in many HT movies)
Sub out is the ticket.
Two channel stereo reproduction I've never seen "sub out" used because in STEREO reproduction they don't use it.
The enhanced SUB tracks are unique to HT so is LTE or what ever it's called it uses a step baffle +3-10db gain 40-60hz.
I've heard it and my MX Macs have it. I never used it. Rumble filter is more likely for me with non servo subs.
Servos are made for LP use in my case. They have a rubble filter switch with a step pot adjustment.
I use a left and right signal to power my plate amps if I use them. There are TWO bass tracks or more in
most music reproduction, don't leave one out. There is a left and right tracks and they can be different.
Stanly Clarks LPs were that way. You could image a center channel with Bass columns (not subs). 80-280hz.
My mains are at 280hz >. They image a separate center, from the bass columns. Kinda cool actually.
You better have pretty "good" room treatment for 2 channel. Dead does not work, correct does.
I'm a Helmholtz enthusiast, with heavy draw drapes. Both are quickly tunable. JIC