Y
yepimonfire
Audioholic Samurai
This is probably the 10th time running Audyssey, and it consistently rolls everything off above 8khz, even on the flat setting, to the point where 17khz is about -10dB.
I have no idea why it’s doing this. I’ve attached measurements, two are at the mlp, the steeply rolled off one is Audyssey flat, the one with the minor roll off (-5dB @17khz) is with it off, and the one that looks near ruler flat above 500hz out to 20khz is a close mic measurement. Obviously, the speakers aren’t bright, so there’s absolutely no need for the roll off.
The measurements were taken with the same Audyssey mic used for the calibration, at the exact position, so I’m not sure why Audyssey is “seeing” a bright top end that it thinks it needs to correct
Any clues?
I have no idea why it’s doing this. I’ve attached measurements, two are at the mlp, the steeply rolled off one is Audyssey flat, the one with the minor roll off (-5dB @17khz) is with it off, and the one that looks near ruler flat above 500hz out to 20khz is a close mic measurement. Obviously, the speakers aren’t bright, so there’s absolutely no need for the roll off.
The measurements were taken with the same Audyssey mic used for the calibration, at the exact position, so I’m not sure why Audyssey is “seeing” a bright top end that it thinks it needs to correct
Any clues?


