So I detail cars...

Sheep

Sheep

Audioholic Warlord
Hey Everyone,

Been meaning to share this with you for a while. I did start a post way back about car detailing but it was right around the beginning, and I was still very new to the concept and practice. I've secured a decent amount of work and skill under my belt, so I thought I'd share some of the cars I've cleaned.

Also, if you have questions or damage on your car and want to know how to go about cleaning it/fixing it, maybe I can help.

Lets get started, first with just some finished shots of my Parents new Car, 2014 Prius V.
DSC_6249 by brianjosephson1, on Flickr

DSC_6341 by brianjosephson1, on Flickr

DSC_6348 by brianjosephson1, on Flickr

DSC_6359 by brianjosephson1, on Flickr

DSC_6384 by brianjosephson1, on Flickr

Being a new car, it's not exactly hard to make it sparkle, but still it was not cleaned or detailed properly at the dealership.

Moving on, this is a buddies Honda Accord. Well taken care of, low mileage, but hasn't seen a proper clean in a few years.
DSC_5060 by brianjosephson1, on Flickr

DSC_5074 by brianjosephson1, on Flickr

DSC_5080 by brianjosephson1, on Flickr

Some deep scratched which were rounded and reduced as much as safely possible.
DSC_5083 by brianjosephson1, on Flickr

DSC_5108 by brianjosephson1, on Flickr

And after! Note that removing all defects was not in the cards, just a general improvement.
DSC_5110 by brianjosephson1, on Flickr

Ready for sealant!
DSC_5138 by brianjosephson1, on Flickr

DSC_5146 by brianjosephson1, on Flickr

Interior cleaned and dressed.
DSC_5155 by brianjosephson1, on Flickr

As well as the vroom vroom.
DSC_5159 by brianjosephson1, on Flickr

Leaving us with this!
DSC_5199 by brianjosephson1, on Flickr

I'm going to split up these posts as I have a few cars I want to show and it'll make for a stupidly long post.

SheepStar
 
Last edited:
Sheep

Sheep

Audioholic Warlord
Next up is another friends car, this time a Mazda 3. It was kept in really good shape with minimal paint defects. It did however have some body shop overspray and just needed some light polishing to make the new bumper paint job not look out of place.

DSC_3338 by brianjosephson1, on Flickr

Car sprayed with the foam Canon to soak and let the cleaners dwell and remove dirt before even touching the paint, a good way to reduce scratches inflicted by wash mitts.
DSC_3346 by brianjosephson1, on Flickr

While it's on the car, you go around and get in the nooks and crannies with small soft brushes with all purpose cleaner (not home stuff, something designed for a car). You'd also go around and do the door trunk and hood jambs and engine bay after this step (might have to rinse if it's hot out though).
DSC_3347 by brianjosephson1, on Flickr

Engine gets foamand APC with brush agitiation.
DSC_3348 by brianjosephson1, on Flickr

Wheels cleaned with a number of special brushes and various cleaners depending on the soil level. Acid works best but it's harsh to choose it wisely.
DSC_3350 by brianjosephson1, on Flickr

Clay bar is used to cut down ingrained particles and smooth the paint out.
DSC_3363 by brianjosephson1, on Flickr

Floor mats are hit with boiling hot water, extractor and spot cleaning solutions and then scrubbed with the polisher using a soft bristle brush and slow speed setting. It's 10 times faster then manual scrubbing. After they are rinsed with hot water and extracted to damp before being left to dry in the house.
DSC_3379 by brianjosephson1, on Flickr

DSC_3388 by brianjosephson1, on Flickr

Yum!
DSC_3390 by brianjosephson1, on Flickr

Once in the garage I inspect the paint with various lights to see how bad the paint is and choose my polish and pad combinations. Some times people don't care about chasing all the marks and scratches so a light machining with just 1 polish step is usually what I find I'm doing. Below you'll see the hazy overspray below the mirror.
DSC_3406 by brianjosephson1, on Flickr

This is the paint on the rear bumper, which is brand new. I need the rest of the car to not look out of place to this.
DSC_3412 by brianjosephson1, on Flickr

Small swirl from a brush being used to remove sap.
DSC_3422 by brianjosephson1, on Flickr

50/50 on the overspray after getting hit with a heavy cut polish on a Micro Fiber pad.
DSC_3430 by brianjosephson1, on Flickr

More heavy marks on the door.
DSC_3450 by brianjosephson1, on Flickr

Reduced to a 75% removal.
DSC_3451 by brianjosephson1, on Flickr

First coat of sealant curing.
DSC_3508 by brianjosephson1, on Flickr

And removed.
DSC_3518 by brianjosephson1, on Flickr

DSC_3519 by brianjosephson1, on Flickr

Tape protecting the new paint from polish and sealant. New paint needs a good few months before you can wax it as it needs to breath and cure fully.
DSC_3542 by brianjosephson1, on Flickr

Engine cleaned.
DSC_3549 by brianjosephson1, on Flickr

Fin.
DSC_3610 by brianjosephson1, on Flickr

SheepStar
 
Sheep

Sheep

Audioholic Warlord
Last one for now, this is my friends 2014 Toyota Tundra 1794 Edition.
DSC_5646 by brianjosephson1, on Flickr

He lives up north (near alaska) and it definitely needs regular cleaning. I usually clean the truck and he gives me a nice bottle of scotch.
DSC_5655 by brianjosephson1, on Flickr

DSC_5660 by brianjosephson1, on Flickr

DSC_5661 by brianjosephson1, on Flickr

DSC_5664 by brianjosephson1, on Flickr

DSC_5669 by brianjosephson1, on Flickr

Lets clean! Engine, under carriage, and body all hit with APC and then snow foam to pull as much dirt as possible before contact.
DSC_5686 by brianjosephson1, on Flickr

DSC_5687 by brianjosephson1, on Flickr

DSC_5690 by brianjosephson1, on Flickr

After the wash the clay comes out to smooth out what was left behind.
DSC_5695 by brianjosephson1, on Flickr

Paint is okay for the situation. No cut polish was used as he doesn't want to start removing clear coat until there is more scratches.
DSC_5699 by brianjosephson1, on Flickr

DSC_5703 by brianjosephson1, on Flickr

I used a couple different cleaner polishes to remove light marks and fill in the rest. These are super mild and you could polish for days without removing more then a micron of paint. Worked well on the tail lights though!
DSC_5713 by brianjosephson1, on Flickr

DSC_5723 by brianjosephson1, on Flickr

Polish being worked into the door panel. A lot of people are unclear how polishes really work, but it's actually quite simple. I'll explain it later in another post.
DSC_5737 by brianjosephson1, on Flickr

Entire interior APC'd and cleaned. The floor liners protected the carpet so only a light vacuum was required.
DSC_5739 by brianjosephson1, on Flickr

And the finished product.
DSC_5742 by brianjosephson1, on Flickr

DSC_5744 by brianjosephson1, on Flickr

DSC_5755 by brianjosephson1, on Flickr

DSC_5780 by brianjosephson1, on Flickr

DSC_5782 by brianjosephson1, on Flickr

DSC_5786 by brianjosephson1, on Flickr

DSC_5792 by brianjosephson1, on Flickr

DSC_5793 by brianjosephson1, on Flickr

DSC_5794 by brianjosephson1, on Flickr

DSC_5816 by brianjosephson1, on Flickr

DSC_5818 by brianjosephson1, on Flickr

DSC_5822 by brianjosephson1, on Flickr

DSC_5839 by brianjosephson1, on Flickr

That's enough for now. I haven't been able to detail for a while due to home renovations. I have 5 more cars pending for hopefully the next month or so.

SheepStar
 
BoredSysAdmin

BoredSysAdmin

Audioholic Slumlord
I could say something smart-ass like - "what's the big deal? So you know how to clean cars. Welcome to America amigo" but then again I know how much detailing of top end luxury cars costs and I decided to keep my smartass comments to myself. You could be making more money cleaning cars than me fixing computers.

Oh and really nice job.
 
lsiberian

lsiberian

Audioholic Overlord
Yeah I'd pay to fix up my car if you were around here. My car needs a lot of work and I don't have the garage for it.
 
Sheep

Sheep

Audioholic Warlord
Thanks Fellas (I think?).

This is a side job I do to line my pockets, and since I bank roll the hole operation It's not as profitable as it would seem (I spent 18 hours on the accord alone). Since I usually do friends cars and am constantly testing products and trying new techniques I usually don't charge as much as a normal shop would, but I do usually offer better results and the products I use are much better. One thing they have on me is turn around time, being 1 person it can take a whole weekend plus a day for a basic single stage polish and in/out clean (like the Tundra). But my costs will eventually drop to nearly nothing except my time, and when you have results like that and prices which are usually half of the shops locally, it's easy to keep busy.

SheepStar
 
Last edited:
its phillip

its phillip

Audioholic Ninja
I've never had my cars detailed like that (I'm assuming it's not cheap). Great work.
 
BoredSysAdmin

BoredSysAdmin

Audioholic Slumlord
Like i said Brian, you should be looking to detail classic and luxury cars. Not accords :)
As my own 4 wheels - they are in such poor state, mostly not my fault - parking on streets of New York long enough and the car will get abused. From casual bumber dents to more serious hit and runs on parked cars. To fix the body would cost me more than the car worth. So i just maintain it mechanically
 
Sheep

Sheep

Audioholic Warlord
Like i said Brian, you should be looking to detail classic and luxury cars. Not accords :)
As my own 4 wheels - they are in such poor state, mostly not my fault - parking on streets of New York long enough and the car will get abused. From casual bumber dents to more serious hit and runs on parked cars. To fix the body would cost me more than the car worth. So i just maintain it mechanically
Ahh, yeah New York, San Fran, places like that are for bicycles.

I honestly like detailing normal cars. It's amazing what is fixable/cleanable. Cars go from "I wonder how much I'll get for it" to "I'm not selling it now". True Story. Classic cars with single stage paint and chrome bits the size of a finger nail demand so much attention and careful work that you have to pay that much. You don't want some side street turn and burn detail for retail place taking a wool pad rotarty to those. I don't have all the tools I would need to take on project like that (paint depth guage being the big one), so I'll stick to the plebian models. I have connections thanks to the day job to lots of high end cars, but it's hard to convince them to let me drive it 23kms home to detail it then drive it 23kms back.

SheepStar
 
Sheep

Sheep

Audioholic Warlord
I've never had my cars detailed like that (I'm assuming it's not cheap). Great work.
I'm cheap, but I'm not that close to you. I'm actually very far away from you. You'd be better of learning to do it yourself. I can help if you need advice on what to use and where.

SheepStar
 
Sheep

Sheep

Audioholic Warlord
This next car is a co-workers. 1993 Mazda RX-7 FD3S. Insanely fun car and well loved and used, but the paint was in need of a spruce up. The detailer at my dealership gave it a shot but he uses very poor techniques and products and the end results was horrible. My deal with coworkers is $100 dollars and I will clean, polish, and wax/seal the paint (assuming the car isn't gigantic).
I started with cleaning the wheels. This is some of the brushes I used for wheel cleaning, all with their own purpose.
Small brush to get into the lug holes and around the small cracks on the face of the wheel.

DSC_5997
by brianjosephson1, on Flickr

The large brush is to get the face of the wheels and the tire, as well as the inner sides of the spokes (or as much as posible depending on the rim design).
DSC_5998
by brianjosephson1, on Flickr

The Wheel Woolie (microfiber wad on a stick) is for the inner sides of the face and the barrel of the rim. It is gentle, but the hard pole makes for good scrubbing power. I also have a bristle style brush like this but it's for larger spoke spacing.

DSC_5999
by brianjosephson1, on Flickr

Now, if you consider this car was "polished" less then a year before I polished it, you'd think the paint was nice. It's not.

DSC_6013
by brianjosephson1, on Flickr

But it's not ruined yet. It's single stage paint, and you have to be careful with how aggressive you get, but these are small scratches and not too bad on soft Japanese paint.

DSC_6015
by brianjosephson1, on Flickr

The body was in better shape in most spots, mainly just polishing haze and light swirls from the improper use of a rotary polisher and wool pad.

DSC_6025
by brianjosephson1, on Flickr

But it came up pretty nice.

DSC_6026
by brianjosephson1, on Flickr

Wheels were also sealed with a special high heat resistant sealant.

DSC_6041
by brianjosephson1, on Flickr


DSC_6042
by brianjosephson1, on Flickr

The front bumper was the worst part of the car, being plastic and old the paint was in needed of a re-spray, so the gloss levels achieved were not the same as the metal body panels. After working until about 3 in the morning this is how the car looked.

DSC_6049
by brianjosephson1, on Flickr

DSC_6051
by brianjosephson1, on Flickr

SheepStar
 
Last edited:
C

Chu Gai

Audioholic Samurai
You are a phucking artist! You anywhere near Chicago?
 
BoredSysAdmin

BoredSysAdmin

Audioholic Slumlord
Just for a reference this detailing job took whooping 120 hours :eek:, that's 15 8 hour days (


but then again - small price to pay for a cool mil dollar (plus) car
 
Sheep

Sheep

Audioholic Warlord
Just for a reference this detailing job took whooping 120 hours :eek:, that's 15 8 hour days (


but then again - small price to pay for a cool mil dollar (plus) car
Yeah, there is some really high end and excellent shops in the UK. The Forum I frequent for detailing is based in the UK.

Check out KDS detailing for some wickedly good work.

SheepStar
 
Sheep

Sheep

Audioholic Warlord
I'm not done yet!

Another Mazda 3, a good buddy of mine that brings the car to me once a year. He didn't shaw it once since I detailed it last time (note this photos is after an initial wash to see how the products held up).
DSC_5491 by brianjosephson1, on Flickr

Snowfoam!
DSC_5512 by brianjosephson1, on Flickr
DSC_5515 by brianjosephson1, on Flickr

This is something new I haven't shown you yet. It's a fall out remover. It binds with metallic particles on the paint and dissolves them, and changes the metal purple which makes the car look like it's bleeding if it's really bad.
DSC_5524 by brianjosephson1, on Flickr

Because the car was in good shape, I had more time for extra steps due to saved time polishing. Wheels on, inside and out cleaned and sealed.
DSC_5542 by brianjosephson1, on Flickr
DSC_5543 by brianjosephson1, on Flickr
DSC_5543-1 by brianjosephson1, on Flickr

Interior all cleaned and dressed.
DSC_5577 by brianjosephson1, on Flickr
DSC_5580 by brianjosephson1, on Flickr
DSC_5582 by brianjosephson1, on Flickr

Engine cleaned and dressed.
DSC_5588 by brianjosephson1, on Flickr

Contrast.
DSC_5610 by brianjosephson1, on Flickr
DSC_5615 by brianjosephson1, on Flickr

Up next is the beading shots. This is something a lot of detailers get bend over. Waxes and sealants are there to protect your paint, not make it shine per say. Polishes and compounds remove the defects from the clear/top coat to make it shine. All a wax or polish is supposed to do is keep that shine protected. The side effect of this protection is making water bead up and fall off. Not all waxes bead and sheet water the same. Some resist dirt build up more, others bead up very tight, and some completely sheet the panel dry. Just depends on the product and what your'e after. They also have different duration in protection, and there is lots of claims of durability. Testing which one lasts the longest is a specialty of mine.
DSC_5623 by brianjosephson1, on Flickr
DSC_5624 by brianjosephson1, on Flickr
DSC_5627 by brianjosephson1, on Flickr
DSC_5633 by brianjosephson1, on Flickr
DSC_5637 by brianjosephson1, on Flickr

Nice and clean, ready for another year.
DSC_5619 by brianjosephson1, on Flickr

SheepStar
 
3db

3db

Audioholic Slumlord
beautiful work Sheep. Really like it. Question, how do you get hardened salt stains out of car mats and out of the foot well? I can nwver get the carpet to lift after salt has hardened. I've tried warm vinegar with a soft wire bristle on those spots.
 
Last edited:
Sheep

Sheep

Audioholic Warlord
I just typed up a reply but it got deleted. I'll go over my procedure for mat/carpet cleaning and maybe some of these things might help out.

1. Vacuum carpet/mat thoroughly. You don't want anything else on the mat if you can avoid it.
2. Boil water.
3. Spray APC/Stain remover on to troublesome spots. Use carpet, and preferably Automotive specific products.
4. Apply regular carpet/mat cleaning solution using the Manuf. application procedure (just don't remove anything yet).
5. Add boiling water to mat, distribute thoroughly making sure to get the troublesome spots.
6. Agitate. If you have a brush, go for something slightly firm. Soft brushes will turn to mush in the hot water. I use my polisher with a brush as it saves me the most time.
7. Once agitiation is complete rinse the mat, preferably with hot water. I have a large laundry sink that I use for the cleaning steps (spraying detergent, boiling water application, brushing, and rinse).
8. Once rinsing is complete extract the water out of the mat and check your work. Repeat cleaning steps if it's not clean enough. If you don't have an extractor either a. get one, or b. wring out the mat as best as possible (but get one, they are not expensive and make short work of most carpet stains).

That should help, if not take some pictures and show me what it's like.

SheepStar
 
Matt34

Matt34

Moderator
What foam gun are you using?

Preferred product line?

I've been getting more involved in detailing my own vehicles (subscribed to Ammo NYC detailing on Youtube) but still learning the basics. My wife, with good intentions, got me that big 10" craftsman polisher for Christmas when I told her I was looking at them (specifically Porter Cable 7424xp).

My truck is similar in size to the Tundra plus in has a canopy on the bed so I know how long it takes to do a vehicle that big.

I have those Husky Weatherbeaters in my truck, they do a great job at saving the carpet (as do the weathertech mats).
 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top