F
fmw
Audioholic Ninja
Is this a universal truth or should it contain some modifiers and additional information?The point is that by not driving it as hard, it will give you better, cleaner sound.
Is this a universal truth or should it contain some modifiers and additional information?The point is that by not driving it as hard, it will give you better, cleaner sound.
Okay, I'm too lazy to read that "All Channels Driven" thread, so tell me.When are they ever driven all at the same instant some of the time? Never heard of such source material with that requirement![]()
Assuming you have a 10' ceiling, that's 4,800 cubic feet, which is a nice size room. But yeah, of course, none of us need an external amp. A 100 wpc (2 ch driven) receiver is all we ever need, especially since most of use keep the volume below 85 dBA and no more than 90 dBC?My answer to the original question is no, I wouldn't use the external amplifier personally. My home theater listening room is not huge (20X24) and my speakers are of average sensitivity so an external amplifier wouldn't have any noticeable affect on my system's performance. 100 wpc measured any way you like would be overkill in my situation. Using the external amplifier would simply be one more thing to turn on and off manually while operating the system and one more thing to draw kilowatts from our amateur electric company.
Hard to say but the probability is very high that it is not more than 2 that will ever go to full power at the same instant. Don't know of any soundtrack that has all channels at full power at the same short instant in time.Okay, I'm too lazy to read that "All Channels Driven" thread, so tell me.
How many channels are driven at the same time?
Two? Three?
Straighten me out, will you?![]()
Amplifiers are not animalsIs this a universal truth or should it contain some modifiers and additional information?
And, a lot of people buy extra horsepower too, an overkill. So, it has been implanted in us by the market....But a lot of people do it because they want overkill, ...:
But we were not talking outperforming. You indicated the Yam's 100 watts of power is not the same as the 100watts in the Adcom, somehow it is different, doesn't measure up to the claimed power level by Yamaha.I read the review and yes it did get good marks. I still doubt that it will outperform the Adcom. .
So the Onkyo 875, which is rated for 140 wpc, but measures 201 watts (1 ch driven) is pretty good, huh?Hard to say but the probability is very high that it is not more than 2 that will ever go to full power at the same instant. Don't know of any soundtrack that has all channels at full power at the same short instant in time.
Remember, your filter caps are always recharging for the next dynamic peaks. Also remember, music and even the sound effects are very short in peaks back to back so the caps can recharge or should be able to.
More knowledgeI mean, come on, what's to distinguish us from non-audioholics?![]()
Yes, of course that is good with speakers that are not very sensitive or when you are testing the limits of the amp, speakers, your nerves and the spouse's love for youSo the Onkyo 875, which is rated for 140 wpc, but measures 201 watts (1 ch driven) is pretty good, huh?
I didn't see a 2-ch driven, but the 5-ch driven was 141 watts.
... the yamaha on it's finest day could never produce 100 watts X anything 20hz to 20kzh.... [/QYOTE]
How do you know this? Did you test it on the bench? AH did and they most certainly disagree with your speculations. In fact, it will do a good 130 watts into 8 ohms and 200 into 4 ohms. But, your independent testbench data is welcomed.
Sheer speculation.... the real two cahnnel amp you have will... Believe me on this, especially for music the secondary 100x2 amp will sing, the yamaha 100x5 or whatever will choke the speaks to death at high volume levels, possibly even clip and toast the coils in your drivers. Unless you are talking about a huge 4k + receiver, then an external power amp is your best bet for the main speakers.
Perhaps not but I gave him two good reasons.The simple fact is, he already has the amp and I can't give a good reason why one would NOT want to use it in that instance, unless he was driving some tiny little satellite speakers. .
What about the $1,155 Onkyo 875 (which was measured by 3rd party independently to produce 141 watts/ch with 5 ch driven)?Unless you are talking about a huge 4k + receiver, then an external power amp is your best bet for the main speakers.
Yeah, audioholics/audiophiles have more knowledge, but especially a lot more passion and interest for audio gears.More knowledge![]()
I don't consider having to turn on the amp a good reason. When I turn my receiver on, my amps come on also - one button press, no walking over to anything. The electricity one is valid, but paying a few bucks (literally) more a month in electricity is something I can live with if it means I can enjoy my music and movies more as well - others may see it differently.Perhaps not but I gave him two good reasons.
I didn't realize his amp had a 12v trigger. I'm surprised it does. I see it differently than you do because, in my system, a separate amp wouldn't improve anything over a receiver so it would be unnecessary baggage. Your system could have different requirements than mine. The point is that having a separate amp is not universally beneficial. It is a benefit in a minority of cases.I don't consider having to turn on the amp a good reason. When I turn my receiver on, my amps come on also - one button press, no walking over to anything. The electricity one is valid, but paying a few bucks (literally) more a month in electricity is something I can live with if it means I can enjoy my music and movies more as well - others may see it differently.