Help with crossover and configuration

[oscarhen]

I need help with the crossover in my home theather. I have a SONY STR-DE875 receiver and Wharfedale +60 Speakers http://www.iagamerica.com/wharfedale/moviestar60.htm), but I change the central speaker for a The WH-2 system speaker http://www.iagamerica.com/wharfedale/wh2.htm.

The problem is that when I read the articles in the forums, I can configure most of the options you talk about. My big problem is crossover. there is no crossover configuration in my receiver, just one in the sub. I get a decent sound with It but no a clear sound.
This is how my receiver is ( I just reset the option so this is the standar config and I put the min level and the max posible):

EQ:
Front bass: 0dB (-10 to +6)
250Hz ( 99Hz to 1.0KHz)

Front mid: 0db (-10 to +6)
1.0KHz (198hz to 10.0 KHz)

Front treeble: 0dB (-10 to +6)
2.5 KHz (1.o KHz to 10KHz)

Same for Center

Surround Bass: 0dB
250Hz
SUrround Tre: 0dB
2.5 KHz


LEVEL:

Front. Surround, center S.woofer: odB ( standar settings) (-10 to´+6)

LFE MIX XXX db: 0dB
D.Range COMP. : MAX

I really need your help
Thanks

 

[shokhead]

Your reciever must have it set if you dont have an option in the setup menu. If you use the LFE to the sub,that bypasses the sub x over.

 

[oscarhen]

Your reciever must have it set if you dont have an option in the setup menu. If you use the LFE to the sub,that bypasses the sub x over.

But the LFE have to be in OFF, -20 dB to 0db? Sorry but I don´t understand the issue

 

[shokhead]

If your sub is hooked up with the single cable/sub out or LFE, it bypasses the subs x over and your using the recievers x over.