Dynamic Range 20-20K

[Anglofun]

Gents

Having a listen recently and something I have noticed over the years, is the difficulty in getting a dynamic range across the frequency response. Atleast this perception is with a subjective listening session. I'd be curious if there was a way to measure this out.

Just to be more clear hear, Horns or at the very least high efficient drivers are the most dynamic. They come with their issues and flaws but dynamically, everything else dwarfs in comparison to me. Do some compress more than others? Yes, just like other lower efficiency drivers but when you have this kind of headroom, it is still quite magical.

Presently in my main system, I have open baffles that have an overall eff overal 103 db's. BUT at what frequency? I have also noticed that since adding some SVS subs to do part of the 1st octave and even before the first octave (17hz and up)they fill in the frequency response but dynamically and speed wise they aren't keeping up with the other drivers.

Is there room to converse on this subject to maybe play around for a sort of a solution lol?

I can post pics, but for those wondering,

SVS Pb200pro > Supravox exc 400 > EV SP15A > Fountek pro5i (rear firing EV Horn)

The Supravox

Supravox

400-2000 EXC Bass speaker
A loudspeaker of serious audiophile quality: the 400-2000 EXC offers very high quality of response (speed and broadband) because it is built around the same membrane as the 400-2000.
Its advantage remains the possibility of adjusting these parameters thanks to a powerful electromagnetic engine. Adaptable therefore to many speakers, it requires outdoor power supply (ideal from 9 to 15V for 3A).
For audiophters in search of the absolute, the 400-2000 EXC is available in silver coil (99.99%).

Specifications 400-2000 EXC

Sensitivity 2.83 V/1m 96-98 dB Power Supply 9-15 Volts DC.

Magnetic field 0 to 1.6 pokemon pinata bandwidth 23 to 4 kHz

Impedance 8 ohms Diameter HP 404mm

Power max. RMS 120W Thickness bowl Alu 10mm

Weight 10.7 kg Distance fixing holes 382mm

Suspension Canvas Diameter drill speaker 358mm

Resonance frequency 22Hz HP depth 215mm

Excursion linear 10mm Sd 855 cm²

FS MMS CMS re DC
22 Hz 66 g 0.5 6.5

Power supply	9v	12v	15v
Vas	686	686	681
Qts	0.2982	0.2157	0.1805
Qe	0.307	0.220	0.184
Qm	9.4549	9.3288	9.1932
Bl	13.53	15.98	17.53
SPL ref	95.91	97.35	98.16

 

[Anglofun]

I can post the specs to the SP15A from EV and the Fountek tweeter also.

 

[ski2xblack]

When it comes to subs and low bass frequencies, the dynamics, impulse response, decay times can be measured with REW and such.

The subjective sensation of "speed" is often a case of "less is more", with a more rolled off response down low resulting in a subjectively more tight, seemingly faster impression. A system that favors deeper, more linear extension may seem better on paper, but perhaps paradoxically will seem slower to the ear.

If I were you, I would play around with sub calibration/eq to try and get more satisfying results. Those old school coaxial mains may give your SVS subs a run for their money in the dynamics department, presenting a dynamic range mismatch, but really, you shouldn't be intentionally assaulting your hearing with rock concert spls. At normal domestic listening levels you should have plenty of wiggle room to dial it all in.

 

[Anglofun]

When it comes to subs and low bass frequencies, the dynamics, impulse response, decay times can be measured with REW and such.

The subjective sensation of "speed" is often a case of "less is more", with a more rolled off response down low resulting in a subjectively more tight, seemingly faster impression. A system that favors deeper, more linear extension may seem better on paper, but perhaps paradoxically will seem slower to the ear.

If I were you, I would play around with sub calibration/eq to try and get more satisfying results. Those old school coaxial mains may give your SVS subs a run for their money in the dynamics department, presenting a dynamic range mismatch, but really, you shouldn't be intentionally assaulting your hearing with rock concert spls. At normal domestic listening levels you should have plenty of wiggle room to dial it all in.

Maybe my wording is wrong or too shallow. Not easy to fully explain this, so I will do a 2nd attempt.

If there was a separate race where I would have the sub do its response, then the Supravox, then the EV and lastly the tweeter, the dynamic range of each driver fulfilling its segment of FR doesn't react in the same way. I guess there are compression factors happening in different ranges that thins out the driver's capability but above and beyond those problems, the dynamic range on the top end (being ev > Fountek) kicks up way more than the SVS. The supravox is closer but is lagging also a bit. Clear measurements are needed indeed but then what exactly can be done?