Dayton 18" HO Ported Build Thread

[1Randy]

Be careful with GSC their engineering is suspect and that is putting it mildly.

The vented F3 of the RSS390H0 is 33 Hz. So not an impressive sub driver for HT.

This will probably get you where you want.

If you want a clean F3, you will have a cabinet on the large size. This one is reasonable.

I actually built a subwoofer very similar to this in 2010 with the same driver , just not sure if it was the H. F version or HO.

Be careful with GSC their engineering is suspect and that is putting it mildly.

The vented F3 of the RSS390H0 is 33 Hz. So not an impressive sub driver for HT.

This will probably get you where you want.

If you want a clean F3, you will have a cabinet on the large size. This one is

Be careful with GSC their engineering is suspect and that is putting it mildly.

The vented F3 of the RSS390H0 is 33 Hz. So not an impressive sub driver for HT.

This will probably get you where you want.

If you want a clean F3, you will have a cabinet on the large size. This one is reasonable.

Be careful with GSC their engineering is suspect and that is putting it mildly.

The vented F3 of the RSS390H0 is 33 Hz. So not an impressive sub driver for HT.

This will probably get you where you want.

If you want a clean F3, you will have a cabinet on the large size. This one is reasonable.

Be careful with GSC their engineering is suspect and that is putting it mildly.

The vented F3 of the RSS390H0 is 33 Hz. So not an impressive sub driver for HT.

This will probably get you where you want.

If you want a clean F3, you will have a cabinet on the large size. This one is reasonable.

So this is a 12" in a ported 4.9 Net cu/ft correct?

....I do remember you mentioning in another thread the Stereo Integrity SQL15" in a slot ported 4cu/ft Net enclosure would be very good also.?

 

[highfigh]

SEAS for one have not been, there is Falcon acoustics in the UK, and they are making the KEF B i39 again as well as a range of drivers, and sales are hot. Volt are making some excellent drivers. I will look into it.

Italy has a bunch: - B&C Speakers, RCF, Lavoce, and FaitalPRO.

Peerless are still in business in Denmark along with Scanspeak.

Audax is still making drivers in France.

So, you don't have to buy inferior Asian products.

Peerless is part of Tymphany- have you seen their team?

Who We Are | Tymphany

Dynaudio is Chinese-owned, many others are, too. The number of brands you mentioned is very small compared to the past- consolidation and owner retirements are part of it, survival is another.

 

[highfigh]

That makes it difficult, not a lot of good options in the EU. Where are you in the EU? 200 litres is 7 cu.ft. That is a gigantic sub. My first model will fit the bill of that driver is available in the EU.

A 24.5" cube (using 3/4" material) is huge?

 

[TLS Guy]

Peerless is part of Tymphany- have you seen their team?

Who We Are | Tymphany

Dynaudio is Chinese-owned, many others are, too. The number of brands you mentioned is very small compared to the past- consolidation and owner retirements are part of it, survival is another.

Yes, Dynaudio is unfortunately Chinese owned now. However, their Classic drivers live on in the Morel line from Israel. That is due to shared patent arrangements of the founder.