NEW Aerial Acoustics 7T Loudspeakers
Multiple layers of curved, stressed, and laminated MDF provide non-resonant behavior unmatched in conventional flat panel construction. Seven full cross section braces remove any remaining subtle coloration. The resulting labyrinthine structure is virtually inert.
Specially compounded Papyrus forms the stiff but precisely damped midrange cone. This driver is isolated in a separate, wool-filled chamber. The woofer cones are a rigid, damped bilaminate composite. Both driver types have cast magnesium frames, large magnets and long linear excursions. The soft ring-dome tweeter has large dual magnets, a damped chamber, and a copper pole sleeve.
Seamless amplitude and phase integration is provided by precision networks using 21 high-quality components including polypropylene film capacitors and low-oxygen copper air-core coils. High current nickel-steel cores are used in the bass. Separate glass-epoxy boards are employed for the bass and midrange/treble sections. Silver solder and Teflon® insulated high-purity copper wire are used throughout.
Specifications »
Frequency Response: 28Hz to 25kHz ±2dB, -6dB at 23Hz
Dispersion: 30Hz to 15kHz +0, -3dB from axial response 45 degree horizontal measurement window
Sensitivity: 89dB for 2.83 volts at 1 meter on axis
Impedance: 4Ω nominal, 3Ω minimum, low reactance
Power Requirements: 25 watts minimum, 100 or more recommended