O Oddball Junior Audioholic Jun 3, 2024 82 0 6 Jul 17, 2024 #21 You can do what you want with ur 10” drivers and people don’t really agree what is distortion and when compression starts. I decided to downgrade them to surround duty. Well, at least don’t know many that have such exquisite surrounds For sure way better than Klipsch Ultra 2 THX. Reactions: JerryLove
You can do what you want with ur 10” drivers and people don’t really agree what is distortion and when compression starts. I decided to downgrade them to surround duty. Well, at least don’t know many that have such exquisite surrounds For sure way better than Klipsch Ultra 2 THX.
JerryLove Audioholic Ninja Jul 17, 2008 3,158 0 113 Tampa, FL Jul 17, 2024 #22 Trell said: I missed writing that this was for the subwoofer/monitor crossover slope. At hand I don’t recall the crossover slopes for their other drivers. Click to expand... Understood... I just went off on a tangent in general. My bad. Though the rules are basically the same regardless of whether the two drivers are in the same box or not. Reactions: Trell
Trell said: I missed writing that this was for the subwoofer/monitor crossover slope. At hand I don’t recall the crossover slopes for their other drivers. Click to expand... Understood... I just went off on a tangent in general. My bad. Though the rules are basically the same regardless of whether the two drivers are in the same box or not.
JerryLove Audioholic Ninja Jul 17, 2008 3,158 0 113 Tampa, FL Jul 17, 2024 #23 Oddball said: You can do what you want with ur 10” drivers and people don’t really agree what is distortion and when compression starts. I decided to downgrade them to surround duty. Well, at least don’t know many that have such exquisite surrounds For sure way better than Klipsch Ultra 2 THX. Click to expand... Thanks for your permission. What's the SPL output of my 10" speaker at 60Hz? As to definitions: use the same definition you did here: https://forums.audioholics.com/forums/threads/avr-and-speaker-crossovers.129019/post-1647307 You clearly computed it for teetertotter, otherwise you couldn't have told him it wouldn't work. Just do the same thing you did for that post. Feel encouraged to define and quantify both compression and distortion. I'd suggest +/- 3db. Unless you agree with me that, though size provides "some clue" (quoting you), but isn't enough to actually determine capability. Reactions: Trell
Oddball said: You can do what you want with ur 10” drivers and people don’t really agree what is distortion and when compression starts. I decided to downgrade them to surround duty. Well, at least don’t know many that have such exquisite surrounds For sure way better than Klipsch Ultra 2 THX. Click to expand... Thanks for your permission. What's the SPL output of my 10" speaker at 60Hz? As to definitions: use the same definition you did here: https://forums.audioholics.com/forums/threads/avr-and-speaker-crossovers.129019/post-1647307 You clearly computed it for teetertotter, otherwise you couldn't have told him it wouldn't work. Just do the same thing you did for that post. Feel encouraged to define and quantify both compression and distortion. I'd suggest +/- 3db. Unless you agree with me that, though size provides "some clue" (quoting you), but isn't enough to actually determine capability.
O Oddball Junior Audioholic Jun 3, 2024 82 0 6 Jul 17, 2024 #24 And why should I re measure my speakers? This was done years ago and they did compress 2dB at 100dB @2m @50hz. Do you think they got better with age? Really don’t know what your speakers can do - I thought you had those small Klipsch with 5” driver? Are you counting two of those as 1 10”? Reactions: JerryLove
And why should I re measure my speakers? This was done years ago and they did compress 2dB at 100dB @2m @50hz. Do you think they got better with age? Really don’t know what your speakers can do - I thought you had those small Klipsch with 5” driver? Are you counting two of those as 1 10”?
JerryLove Audioholic Ninja Jul 17, 2008 3,158 0 113 Tampa, FL Jul 17, 2024 #25 Based on the size of your LCR woofers (5.5") 80hz might theoretically be a better crossover as these speakers would ideally need to play 40hz frequency (if set at 40hz crossover) at 105dB SPL reference volume. Click to expand... Really don’t know what your speakers can do - I thought you had those small Klipsch with 5” driver? Are you counting two of those as 1 10”? Click to expand... You seemed to know what the other poster's could do based on the size of the woofers. Why can't you tell on mine based on the size of my woofer? Actually the woofer size and the box size will give you really important clues unless you command the force to defeat the physics. Click to expand... Yes. Clues, but not conclusions. Unless you agree with me that, though size provides "some clue" (quoting you), but isn't enough to actually determine capability. Is that it? You agree with me?
Based on the size of your LCR woofers (5.5") 80hz might theoretically be a better crossover as these speakers would ideally need to play 40hz frequency (if set at 40hz crossover) at 105dB SPL reference volume. Click to expand... Really don’t know what your speakers can do - I thought you had those small Klipsch with 5” driver? Are you counting two of those as 1 10”? Click to expand... You seemed to know what the other poster's could do based on the size of the woofers. Why can't you tell on mine based on the size of my woofer? Actually the woofer size and the box size will give you really important clues unless you command the force to defeat the physics. Click to expand... Yes. Clues, but not conclusions. Unless you agree with me that, though size provides "some clue" (quoting you), but isn't enough to actually determine capability. Is that it? You agree with me?
Trell Audioholic Spartan Dec 12, 2018 7,073 0 63 ::1 Jul 17, 2024 #26 Oddball said: You can do what you want with ur 10” drivers and people don’t really agree what is distortion and when compression starts. I decided to downgrade them to surround duty. Well, at least don’t know many that have such exquisite surrounds For sure way better than Klipsch Ultra 2 THX. Click to expand... I’m not sure why you want to die on this particular hill. Below is a SPL measurement (on axis at a distance of 4 meters) at 3% and 10% distortion from Sound and Recording of the Genelec 8361A active monitor that is a “bookshelf” but a big one. It is coaxial with two racetrack woofers for bass. Packs quite a punch and I would love to own them were it not for the price. As the 8361A coaxial it would nicely as a powerful center speaker when put on the side on top of my AVR rack but below my wall mounted TV. It would then replace a two-way bookshelf. Start Das Online-Magazin für Keyboards, Synthesizer, Recording und DJing. Täglich neue Artikel zu Themen, die dich interessieren! www.soundandrecording.de 8361A SAM™ Studio Monitor - Genelec.com The flagship of The Ones range, the 8361A offers the most advanced acoustic performance of any studio monitor on the planet. www.genelec.com Last edited: Jul 17, 2024 Reactions: JerryLove
Oddball said: You can do what you want with ur 10” drivers and people don’t really agree what is distortion and when compression starts. I decided to downgrade them to surround duty. Well, at least don’t know many that have such exquisite surrounds For sure way better than Klipsch Ultra 2 THX. Click to expand... I’m not sure why you want to die on this particular hill. Below is a SPL measurement (on axis at a distance of 4 meters) at 3% and 10% distortion from Sound and Recording of the Genelec 8361A active monitor that is a “bookshelf” but a big one. It is coaxial with two racetrack woofers for bass. Packs quite a punch and I would love to own them were it not for the price. As the 8361A coaxial it would nicely as a powerful center speaker when put on the side on top of my AVR rack but below my wall mounted TV. It would then replace a two-way bookshelf. Start Das Online-Magazin für Keyboards, Synthesizer, Recording und DJing. Täglich neue Artikel zu Themen, die dich interessieren! www.soundandrecording.de 8361A SAM™ Studio Monitor - Genelec.com The flagship of The Ones range, the 8361A offers the most advanced acoustic performance of any studio monitor on the planet. www.genelec.com
JerryLove Audioholic Ninja Jul 17, 2008 3,158 0 113 Tampa, FL Jul 17, 2024 #27 It is funny to see someone on an audio site whose motto is about truth and empiricism dismiss measured output.
It is funny to see someone on an audio site whose motto is about truth and empiricism dismiss measured output.
O Oddball Junior Audioholic Jun 3, 2024 82 0 6 Jul 18, 2024 #28 Just to close this out @JerryLove and @Trell = thank you for your responses. Much appreciated. Seems like we don't seem to get along well so I wish you all the best in enjoying the systems you have, or dreaming about the systems that you could, or could not, have. There is absolutely no point in bothering the rest of community with our little petty things.
Just to close this out @JerryLove and @Trell = thank you for your responses. Much appreciated. Seems like we don't seem to get along well so I wish you all the best in enjoying the systems you have, or dreaming about the systems that you could, or could not, have. There is absolutely no point in bothering the rest of community with our little petty things.
