Living room setup.

[jnelson88]

this disappoints me, you should see how good the inside of their speaker boxes look and you would understand why.

come to think of it the whole port noise may be caused by the port being stuck inside that little crevice, i always noticed the chuffing came from inside the port not the opening. if anyone owns one of these subs and has the tools to do this i would be very interesting in seeing how much of a difference it would make side loading the port rather then front firing.

you would have to remake the box, theirs not way to 100% seal that hole up, I might see about taking the one piece out. I have the tools. One thing that can be done, their is a plastic piece on the cap of the port. That could be the cause.

I know polk makes good speaker boxes, I have their low end line the T15 and they sound good and their construction is solid. They need to get someone else in charge of making their subs.

 

[yepimonfire]

their new subs are good. before they just didnt put any effort into it. the PSW10 is an old model.

 

[jnelson88]

their new subs are good. before they just didnt put any effort into it. the PSW10 is an old model.

Id like a chance to check out but where I'm out theirs not much. Thats why rely heavily on the audioholics and audioholics forums for research, I just hate asking a bunch of questions sometimes it seems to bother some, anyways I may try doing some work see what I can do.