How much gain below 20hz

[TankTop5]

I have heard some people recommend up to 20db of gain below 20hz. I watch movies around 75db and I have dual HSU VTF-TN1’s. Thinking about giving it a shot with gain starting around 25hz and rising quickly to 20db gain at 20hz and below. Room is 800 ft.².

anyone have any thoughts on doing this?

 

[shadyJ]

That seems pretty nuts. If you want some more low-end oomph, I can see goosing up the range below 30Hz by a few dB. That should do the trick. 20dB of boost in infrasonic ranges is crazy. I guess you could try it. The problem is, you probably listen at a louder level than 75dB, and, while your subs do have a nice amount of headroom in deep bass, they don't have infinite headroom, and a 20dB boost below 20Hz is asking a lot of any sub system.

 

[m. zillch]

Content below 20Hz is called infrasonic for a reason.
- if reproduced at the accurate, true level experienced in even the most expensive/deluxe commercial theaters you won't hear/experience a thing
- no commercial subwoofers sold to theaters can reproduce it either
- the professional sound mixers who made the move did not hear/experience it nor intend you to.

What's next? Will people try to get ultraviolet light out of their video screens? It's like that.

 

[TLS Guy]

Content below 20Hz is called infrasonic for a reason.
- if reproduced at the accurate, true level experienced in even the most expensive/deluxe commercial theaters you won't hear/experience a thing
- no commercial subwoofers sold to theaters can reproduce it either
- the professional sound mixers who made the move did not hear/experience it nor intend you to.

What's next? Will people try to get ultraviolet light out of their video screens? It's like that.

I would be careful doing that. With room gain most subs with 15" or larger drivers will play to 16 Hz. Now the bigger issue is that most ported subs will be decoupling from the tuning by 16 Hz, so upping the power in that range is calculated to cause damage. For sealed subs the power has to increase enormously as there is a 12 db per octave boost below F3, which even for a large driver sealed sub will be north of 30 Hz. So I would say don't do it, or you may well be looking for a new sub.

 

[WaynePflughaupt]

In addition to what’s been said, in my experience artificially boosting the lows to a sub (i.e. via EQ) doesn’t sound nearly as good as having a sub that just gets that low naturally.

Regards,
Wayne A. Pflughaupt

 

[j_garcia]

Content below 20Hz is called infrasonic for a reason.
- if reproduced at the accurate, true level experienced in even the most expensive/deluxe commercial theaters you won't hear/experience a thing
- no commercial subwoofers sold to theaters can reproduce it either
- the professional sound mixers who made the move did not hear/experience it nor intend you to.

What's next? Will people try to get ultraviolet light out of their video screens? It's like that.

You don't seem to understand what infrasonic actually means. Yes, you cannot hear it, but the vibration is still present and is still detectable by humans as pressure. The article you linked mentioned earthquakes, which have vibrations that are felt but not necessarily heard. Even some music can contain information below 20hz, such as pipe organs.

As for films, it may not be intentionally put into the tracks, but it may be present within the a particular sound because, explosions as an example, are not a single wave pattern. While a sound has a fundamental, it also has other harmonics that could extend into infrasonic. Batman Begins is famous for having a scene that has a 2Hz drop, which can be measured, but obviously not heard (seems most home theater processors would filter it out anyway).

There are a lot of films that dip into infrasonic territory. There are also many home theater subs that extend below 20Hz, which you would need to get that infrasonic information; aka vibration. A sub that is -3dB @ 25Hz will more or less not reproduce it at all.

 

[m. zillch]

You don't seem to understand what infrasonic actually means. Yes, you cannot hear it, but the vibration is still present and is still detectable by humans as pressure.

When replayed at the level it actually occurs in the film without artificially boosting it, from the seated listening position? Nope.
[And noticing your remote control or empty wine glass is dancing around on top of your glass coffee table, or other similar sympathetic vibrations in the room (like the sub's power cord slapping against the cabinet) doesn't count as "detectable by humans": That annoying rattling noise is higher frequency and could even be recorded by a dirt cheap mic, say built into a cellphone].

 

[j_garcia]

I ran test tones on my former Aidre Tempest that was tuned to 14.5Hz (15", vented cylinder, custom built). Yes, below 22Hz, you could definitely not hear it. 22 and up you could feel it activate the air in my very large room, 32x15x20. Below that, it was just various things in the room having sympathetic resonance, like my closet door right at 16Hz.

Are you suggesting that content at and below 20Hz has no benefit to the listener? I agree that much of what people perceive as "rumble" is higher than that.