Sony UBP-X800 Still Draws Power When Turned OFF

Verdinut

Verdinut

Audioholic Spartan
Today I touched the top of my UBP-X800 and I noticed that close to the AC cord input, the touch is slightly warmer than the rest of the surface. The KillAWatt meter indicates Watt: 5.4 and VA: 13.3
I wonder why. Would there be some sort of standby mode? My 2 Oppo BD players do have a standby mode but they feature a pilot bulb showing it.

A lot of electronic products and appliances indeed consume power when turned off. You would be surprised if you checked some with a KillAWatt tester or other appropriate product.
 
Last edited:
TLS Guy

TLS Guy

Seriously, I have no life.
Today I touched the top of my UBP-X800 and I noticed that close to the AC cord input, the touch is slightly warmer than the rest of the surface. The KillAWatt meter indicates Watt: 5.4 and VA: 13.3
I wonder why. Would there be some sort of standby mode? My 2 Oppo BD players do have a standby mode but they feature a pilot bulb showing it.

A lot of electronic products and appliances indeed consume power when turned off. You would be surprised if you checked some with a KillAWatt tester or other appropriate product.
That is the draw for the auto on circuit and for the device to be ready to receive input from the remote. The power supply has to be in low power mode to power those circuits. Practically all devices consume some power these days when off.
 
Mark E. Long

Mark E. Long

Audioholic General
I’ve two Sony’s there is a menu that enables a quick start up I believe this setting leaves some things turned on for a quick boot up cause they can take awhile if left it’s own device .
 
Verdinut

Verdinut

Audioholic Spartan
I’ve two Sony’s there is a menu that enables a quick start up I believe this setting leaves some things turned on for a quick boot up cause they can take awhile if left it’s own device .
Mark, have you had a chance to listen to the HDI 3800 speakers? I know that they have a rather linear frequency response, and with their high frequency wave guide, they produce excellent dispersion performance. I'm sure that Floyd Toole was involved with their design, following his experience with anechoic chamber testing in the National Research Council Canada. Moreover, Shady Jim did enjoy reviewing them.

As a matter of fact, because of my age, I've just turned 84 and those speakers are about at the top of my list as replacement of my own designed speakers. They don't take much space and they easily fit in smaller rooms. I'm thinking of going back to stereo, and selling my 7 channel system, therefore looking for a much simpler audio rig in due course. Of course, the Philharmonic loudspeakers are also very interesting but shipping cost might not be affordable.
 

Latest posts

newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top