If I die before these are finished ... I'm going to be pissed. Be careful what you say Alex ......
haraldo Audioholic Warlord Jan 22, 2014 #81 Alex2507 said: If I die before these are finished ... I'm going to be pissed. Click to expand... Be careful what you say Alex ......
Alex2507 said: If I die before these are finished ... I'm going to be pissed. Click to expand... Be careful what you say Alex ......
lsiberian Audioholic Overlord Jan 22, 2014 #82 Alex2507 said: If I die before these are finished ... I'm going to be pissed. Click to expand... Has Adam been muttering in his sleep again.
Alex2507 said: If I die before these are finished ... I'm going to be pissed. Click to expand... Has Adam been muttering in his sleep again.
Bryceo Banned Jan 22, 2014 #83 I'm verey confused I thought it was Alex and Doug not Alex and Adam oh god
Alex2507 Audioholic Slumlord Feb 13, 2014 #84 lsiberian said: Did Chris actually complete those? I thought I remember their being all sorts of drama over them. You make me want to leave work early fire up the table saw and finish the electronics for my speakers. Click to expand... Don't threaten me with finishing a speaker project in under a decade. Yeah, Chris completed those and Jerry owns and listens to them. I don't think you can finish the electronics with the table saw. It's not going to work.
lsiberian said: Did Chris actually complete those? I thought I remember their being all sorts of drama over them. You make me want to leave work early fire up the table saw and finish the electronics for my speakers. Click to expand... Don't threaten me with finishing a speaker project in under a decade. Yeah, Chris completed those and Jerry owns and listens to them. I don't think you can finish the electronics with the table saw. It's not going to work.
Alex2507 Audioholic Slumlord Feb 13, 2014 #86 STRONGBADF1 said: 05-10-2010, 03:37 pm Click to expand... You have a mean streak.
lsiberian Audioholic Overlord Feb 14, 2014 #87 Alex2507 said: Don't threaten me with finishing a speaker project in under a decade. Yeah, Chris completed those and Jerry owns and listens to them. I don't think you can finish the electronics with the table saw. It's not going to work. Click to expand... Yeah who am I to talk about taking a while with a project. Right now I'm working on the boxes housing the electronics. The speaker enclosure construction is complete.
Alex2507 said: Don't threaten me with finishing a speaker project in under a decade. Yeah, Chris completed those and Jerry owns and listens to them. I don't think you can finish the electronics with the table saw. It's not going to work. Click to expand... Yeah who am I to talk about taking a while with a project. Right now I'm working on the boxes housing the electronics. The speaker enclosure construction is complete.
lsiberian Audioholic Overlord Feb 19, 2014 #88 Speaker Enclosures Ready for testing on Electronic Enclosures Electronic Enclosure Completed Middles Gluing Up the last Electronic Enclosure Middle. Speaker Front Speaker Back
Speaker Enclosures Ready for testing on Electronic Enclosures Electronic Enclosure Completed Middles Gluing Up the last Electronic Enclosure Middle. Speaker Front Speaker Back
sawzalot Audioholic Samurai Feb 19, 2014 #89 lsiberian said: The build has begun this will be the interior structure of the speakers. They will be inside a constraint layer composed of roofing felt. Then an exterior plywood structure will be built around the interior structure. The bracing will be significant and their will be an 3" port. WinISD model Box notes was used to compute the interior the bracing is more Click to expand... Seems like just yesterday we saw the beginning, congrats on being so close to the finish.
lsiberian said: The build has begun this will be the interior structure of the speakers. They will be inside a constraint layer composed of roofing felt. Then an exterior plywood structure will be built around the interior structure. The bracing will be significant and their will be an 3" port. WinISD model Box notes was used to compute the interior the bracing is more Click to expand... Seems like just yesterday we saw the beginning, congrats on being so close to the finish.
Alex2507 Audioholic Slumlord Feb 19, 2014 #90 Bipole 3-way? Like really bipole. I wasn't expecting one speaker to have 6 drivers. That'll run up the cost pretty quick but it's got my attention. Now I really do want to hear what you think of their sound. At first I thought you put binding posts on the front.
Bipole 3-way? Like really bipole. I wasn't expecting one speaker to have 6 drivers. That'll run up the cost pretty quick but it's got my attention. Now I really do want to hear what you think of their sound. At first I thought you put binding posts on the front.
lsiberian Audioholic Overlord Feb 20, 2014 #91 Alex2507 said: Bipole 3-way? Like really bipole. I wasn't expecting one speaker to have 6 drivers. That'll run up the cost pretty quick but it's got my attention. Now I really do want to hear what you think of their sound. At first I thought you put binding posts on the front. Click to expand... The tweeters are from Andrew. The Midrange Dome's where one of Chris's favorites. The woofers are reused from the RB Kit. I really wanted some SB Acoustics drivers, but those aren't cheap. They sounded good in the initial testing before an inductor burned out on my minidsp. What's funny is at the beginning of the project the minidsp and chip amps didn't even exist on the consumer market. I wouldn't attempt this without a fully active design.
Alex2507 said: Bipole 3-way? Like really bipole. I wasn't expecting one speaker to have 6 drivers. That'll run up the cost pretty quick but it's got my attention. Now I really do want to hear what you think of their sound. At first I thought you put binding posts on the front. Click to expand... The tweeters are from Andrew. The Midrange Dome's where one of Chris's favorites. The woofers are reused from the RB Kit. I really wanted some SB Acoustics drivers, but those aren't cheap. They sounded good in the initial testing before an inductor burned out on my minidsp. What's funny is at the beginning of the project the minidsp and chip amps didn't even exist on the consumer market. I wouldn't attempt this without a fully active design.
haraldo Audioholic Warlord Feb 20, 2014 #92 lsiberian said: What's funny is at the beginning of the project the minidsp and chip amps didn't even exist on the consumer market. Click to expand... Because.... this is what we call a long running process
lsiberian said: What's funny is at the beginning of the project the minidsp and chip amps didn't even exist on the consumer market. Click to expand... Because.... this is what we call a long running process
lsiberian Audioholic Overlord Feb 20, 2014 #93 Electronic enclosures coming along nicely. 1 step closer.
Alex2507 Audioholic Slumlord Feb 21, 2014 #94 lsiberian said: 1 step closer. Click to expand... Yeah, buddy! I remember Andrew selling those tweeters. So the enclosure above is for the chip amps? How about a link for that? I assume you have a DCX2496? Your clamp selection is remarkable. I'm a little jealous.
lsiberian said: 1 step closer. Click to expand... Yeah, buddy! I remember Andrew selling those tweeters. So the enclosure above is for the chip amps? How about a link for that? I assume you have a DCX2496? Your clamp selection is remarkable. I'm a little jealous.
Rickster71 Audioholic Spartan Feb 21, 2014 #95 Alex2507 said: Your clamp selection is remarkable. I'm a little jealous. Click to expand... I was going to mention that. I'll bet if he sold all of those clamps, lsiberian could afford a nice pair of speakers.
Alex2507 said: Your clamp selection is remarkable. I'm a little jealous. Click to expand... I was going to mention that. I'll bet if he sold all of those clamps, lsiberian could afford a nice pair of speakers.
lsiberian Audioholic Overlord Feb 21, 2014 #96 Alex2507 said: Yeah, buddy! I remember Andrew selling those tweeters. So the enclosure above is for the chip amps? How about a link for that? I assume you have a DCX2496? Your clamp selection is remarkable. I'm a little jealous. Click to expand... I have 3 minidsp boards for the crossovers. One for each speaker they will be with the chip amp in the enclosure. The corner clamps are by far my best investment to date sawz suggested them.
Alex2507 said: Yeah, buddy! I remember Andrew selling those tweeters. So the enclosure above is for the chip amps? How about a link for that? I assume you have a DCX2496? Your clamp selection is remarkable. I'm a little jealous. Click to expand... I have 3 minidsp boards for the crossovers. One for each speaker they will be with the chip amp in the enclosure. The corner clamps are by far my best investment to date sawz suggested them.
sawzalot Audioholic Samurai Feb 21, 2014 #97 Rickster71 said: I was going to mention that. I'll bet if he sold all of those clamps, lsiberian could afford a nice pair of speakers. Click to expand... "sold the clamps" and that's just in scrap metal !
Rickster71 said: I was going to mention that. I'll bet if he sold all of those clamps, lsiberian could afford a nice pair of speakers. Click to expand... "sold the clamps" and that's just in scrap metal !
slipperybidness Audioholic Warlord Feb 21, 2014 #98 lsiberian said: The tweeters are from Andrew. The Midrange Dome's where one of Chris's favorites. The woofers are reused from the RB Kit. I really wanted some SB Acoustics drivers, but those aren't cheap. They sounded good in the initial testing before an inductor burned out on my minidsp. What's funny is at the beginning of the project the minidsp and chip amps didn't even exist on the consumer market. I wouldn't attempt this without a fully active design. Click to expand... What chip amps are you using? The Hypex Ncore? Did you build them or buy them? Dang, man, you design your speakers for what will be on the market in the next several years! Kind of like the Xbox/PS4/Computer design cycle.
lsiberian said: The tweeters are from Andrew. The Midrange Dome's where one of Chris's favorites. The woofers are reused from the RB Kit. I really wanted some SB Acoustics drivers, but those aren't cheap. They sounded good in the initial testing before an inductor burned out on my minidsp. What's funny is at the beginning of the project the minidsp and chip amps didn't even exist on the consumer market. I wouldn't attempt this without a fully active design. Click to expand... What chip amps are you using? The Hypex Ncore? Did you build them or buy them? Dang, man, you design your speakers for what will be on the market in the next several years! Kind of like the Xbox/PS4/Computer design cycle.
lsiberian Audioholic Overlord Feb 21, 2014 #99 slipperybidness said: What chip amps are you using? The Hypex Ncore? Did you build them or buy them? Dang, man, you design your speakers for what will be on the market in the next several years! Kind of like the Xbox/PS4/Computer design cycle. Click to expand... Sure 4x100 they are no longer in production, but if I need more power upgrading is easy. I can always recut the boxes now with the table saw it's way easier to do cutting. Next up is either is probably a router table. Really want one as easy as the saw though.
slipperybidness said: What chip amps are you using? The Hypex Ncore? Did you build them or buy them? Dang, man, you design your speakers for what will be on the market in the next several years! Kind of like the Xbox/PS4/Computer design cycle. Click to expand... Sure 4x100 they are no longer in production, but if I need more power upgrading is easy. I can always recut the boxes now with the table saw it's way easier to do cutting. Next up is either is probably a router table. Really want one as easy as the saw though.
