Tx-sr875 ONKYO & how to get dts-hd Master Audio on!!!!!!????

[brachzilla]

Ok i have a 1.3a "M" series HDMI cable hooked up that has a DTS-HD master audio LOGO on the package, hooked up to a "DMP-bd60" panasonic Blu Ray, and ran PASS THROUGh to the reciever - TX-sr875.



NOW here is the question of ages! How do i get DTS-hd MASTER AUDIO TO COME ACCROSS THE RECIEVER there is a light that....lights up on the front "dts-hd master audio"! but i go thru the channels of.....thx..and 7.1 nurrel and it NEVER GETS TO MASTER AUDIO.

What do i need to do ? Please help.

DO I use bit stream...or...PCM? A Hdmi cable..or optical?, and in full detail, could you even call me and walk me thru it please? i love the receiver, i just need some PRo ...help me out!THanks so much


BRACHZILLA

 

[dapack69]

Set the BD player to bitstream and you have to use an HDMI cable.

Have you read the instructions? I can't call you as I'm in South Korea and would cost me an arm and a leg.

 

[jostenmeat]

Have you read the instructions? I can't call you as I'm in South Korea and would cost me an arm and a leg.

Check out Skype. Free.

 

[AVRat]

And the BD has to be encoded with a DTS HD-MA soundtrack.

 

[brachzilla]

master audio

i have a dmp bd60 panasonic blu ray, what settings besides bitstream?


I have a M series monster 1000 hd cable and it should work. Iam frustrated

any other people that can help me

 

[brachzilla]

master audio

I am using a master audio Blu ray dvd, and it should work.


What settings on the onkyo do i go thru that sound the best...MASTER audio dts-hd? or anything better? I really want to hear the dts-hd master audio to hear the difference.

Please help me out. 989-460-0261 or 989-326-4873

 

[AVRat]

When the movie's playing, hit the display button on the receiver remote to see input source info, pg 69.

 

[brachzilla]

can you call me tonight to help

walk me thru the process?

 

[AVRat]

Don’t know how much more I could help as I’m not well versed on either unit and am just going by the manuals.

Make sure the BD-Video Secondary Audio is set to off on the BD60, pg 33. Another member had a similar issue recently with a Sony and this took care of the problem. The Secondary Audio can only be mixed in with the player doing the processing then sent out via PCM. I don’t know why this isn’t an option only when PCM output is selected and not bitstream.

Even if it's being sent via PCM, the player's doing the decoding and you're receiving the MA. It just doesn't show up on the receiver as such, just PCM.

 

[GeneC]

As I recall, when I had an Onkyo 805 in order to get TrueHD and Master Audio on the display I had to go into the 805's setup menu and turn HDMI Audio Out to Off. Sounds counter-intuitive but it worked.