P
PENG
Audioholic Slumlord
Again, we are not arguing, we are agreeing. I just want him to know that in case he might consider spending money (at least the shipping costs I guess even for a free trial) on some filters that can deal with d.c. offset issues, he need to find out if in fact power source is the problem.mitch57 said:Your are correct. However, I seriously doubt that the problem is concentrated in the transformer/windings of his amp. If this were the case, it would be easily diagnosed by taking the amp to another location, such as his dealer, and doing a test with the amp plugged into the dealers wall outlets without any filtering or surge protection.
I found that my problem did not exhist when I took my amp to the dealer. He plugged it in to his wall outlet and the buzz was non exhistant. Both amps were dead silent at the dealers showroom. Please keep in mind that the dealer did not have any filtering going on when I plugged in my amp. We just plugged it into a standard wall outlet.
I personally don't see the need/advantage of using silicone or other means of silencing the amp unitl you positively identify where the buzzing is coming from.
In my particular circumstance, I positively identified that the problem was not resident in the amp, but in the power coming into my house. I am only suggesting that "wanjeyin" first identify if it truly is coming from the amp or from his power source. Plugging the amp in to another power source in a different town or at least a different suburb should provide the answer.
I have a few gear, they behave from being almost silent, a little hum, to a louder hum. All in the same house with the same power source. I have to assume that the one that hums louder is due to the way the transformer is built and a filter network would not help much in this case. Granted, it always helps to have a cleaner source but it won't quiet the hum that much if at all.
Sorry, I should have been more specific.