Pattern 1, Pattern 2

[Anglofun]

Folks!

Questioning here,

Can I set Pattern 1, use the mic and PEQ, save it and have 2 different setups? Then repeat a different scenario and save it as pattern 2?

Hope the question is clear.

 

[Trell]

You're missing some details, like what devices you're using.

 

[Anglofun]

You're missing some details, like what devices you're using.

Yamaha a4a Aventage

Appletv

hope this answers the question

 

[Trell]

Yamaha a4a Aventage

Appletv

hope this answers the question

Sorry, I don't know if the Yamaha can have several room EQ measurements and switch between them.

 

[everettT]

Sorry, I don't know if the Yamaha can have several room EQ measurements and switch between them.

They previously couldn't and have no knowledge that whether that has changed.

 

[Anglofun]

I guess I'll have to try and see.

Thanks

 

[Trell]

I guess I'll have to try and see.

Thanks

There is also the manual to read for information and should give the answer.

 

[Anglofun]

Since this is a bit of work to do, just wondering, is the pattern 1 pattern 2 possibly different and this for each scene?

 

[Trell]

Since this is a bit of work to do, just wondering, is the pattern 1 pattern 2 possibly different and this for each scene?

That obviously depends on the positions of the measurement points.

 

[little wing]

I have an older Yamaha RX A3060. I have two patterns saved. 1 "Through" mode (no Eq) 2 "Natural" mode (YPAO Engaged) With the Natural mode I have the sub bumped up a db or 2. Works pretty well for me. . You could save two patterns of Eq, I assume. Maybe copy the Natural settings to Manual, adjust the manual to you liking and save that one. Not sure if that answers your questions though.

 

[Anglofun]

That obviously depends on the positions of the measurement points.

Not sure I understand

 

[Anglofun]

I have an older Yamaha RX A3060. I have two patterns saved. 1 "Through" mode (no Eq) 2 "Natural" mode (YPAO Engaged) With the Natural mode I have the sub bumped up a db or 2. Works pretty well for me. . You could save two patterns of Eq, I assume. Maybe copy the Natural settings to Manual, adjust the manual to you liking and save that one. Not sure if that answers your questions though.

Thanks for that, I will be trying to take different measurements for different configurations today. FRom what you are saying, it should work. So fingers crossed lol

 

[Trell]

Not sure I understand

Measurements for room EQ is quite sensitive to placements of the microphone.

 

[saqib]

Folks!

Questioning here,

Can I set Pattern 1, use the mic and PEQ, save it and have 2 different setups? Then repeat a different scenario and save it as pattern 2?

Hope the question is clear.

Yes, you can set Pattern 1 with the mic and PEQ, save it, and then create a different setup for Pattern 2 and save that as well. Most systems with multiple patterns or profiles allow this functionality.

 

[Anglofun]

Measurements for room EQ is quite sensitive to placements of the microphone.

I very much noticed this! What is the ideal way?

 

[Anglofun]

Circling back to say it works.