Need your expert help !

[zumbo]

Zumbo, you mean on the reciever I should not connect anything on the L/R correct?

If you utilize the l/r pre-outs on the receiver, you should not connect anything to the corresponding speaker terminals on the receiver.

 

[fab68]

Ok. Adam and Zumbo, I have some adjusting to do and everything seems to be working ok. Thank you very much for your help

 

[Adam]

Hey, any time! Feel free to stop by more than every two and a half years.

Glad that it's working for you. Those are some real nice speakers that you have.

 

[zumbo]

Are you sure? That's news to me. The manual for the receiver doesn't indicate that.

100%

Page 18 indicates that "it is not necessary to use the corresponding SPEAKERS terminals". They are just keeping it simple, but they do inform the user.

 

[Adam]

100%

Page 18 indicates that "it is not necessary to use the corresponding SPEAKERS terminals". They are just keeping it simple, but they do inform the user.

I saw that, too. While it's not "necessary" to use them, that does not imply that the receiver will not output amplified signals over the speaker terminals in addition to line-level signals from the pre-amp outputs. I'll bet ya that it'll do both. A pretty safe bet, considering that it's over the internet and neither one of us would likely ever be able to collect.