First off, I apologise if someone else has had this problem, but I've been researching for weeks with no solution.
Onkyo tx-nr609 receiver
Klipsch reference series speakers in 7.1 format, the .1 being the old rw12.
The problem I'm having is not getting any output from the sub whatsoever. It's worked for years; within the last year I moved the setup downstairs and it worked fine. I recently noticed it wasn't working, but the light on the back still would turn on. I brought the sub over to a friend's house that had an onkyo rc270, hooked it up and it didn't work either. Tried multiple RCAs, and none of them worked. So I assumed the sub/amp was bad. Back at home, I hooked up the speaker leads from the sub cone to the front right channel and got sound, so that lead me to believe it was an amp problem.
Fast forward to yesterday, I received my bash 300s, connected the speaker leads, hooked it up through the RCA Line in and got no sound. I took the front left and right speaker wires and hooked those into the high level in on the Bash, set the speaker size to full, still with no output.
I'm stumped! Is this something that can be solved, or am I doomed??
Thanks for reading.