AcuDefTechGuy
Audioholic Jedi
Ha ha. I just realized that Dan had already solved his ceiling speaker.
Would you cut out a piece of sheetrock and fit it into the ceiling hole and then use the sheetrock compound paste or how would you do it?
"Let our rigorous testing and reviews be your guidelines to A/V equipment – not marketing slogans"
Would you cut out a piece of sheetrock and fit it into the ceiling hole and then use the sheetrock compound paste or how would you do it?
D
Danzilla31
Audioholic Spartan
Yeah it's not a popcorn ceiling but with my work schedule right now things are just crazy I'd rather fit new ones in instead of having to repair the drywall reinstall and then repaint. Even having someone come to do it can be a pain because I'll need to be here to let them in and my hospital is slammed thanks to Omnicron. We had 19 callouts the other day that's enough staff to staff 5 of our units I'm getting my butt worked off literally
So I just want to get something up there and I think the Focal will work good at least I hope so Lol.
Then after Omnicron peaks and things calm down I'm taking some serious time off and going to enjoy that room
AcuDefTechGuy
Audioholic Jedi
After Omicron peaks and we all get our Omicron Vaccine (4th one now), you can have a small breather for about 6 months before the NEXT COVID-variant outbreak (and the 5th Vaccine).Yeah it's not a popcorn ceiling but with my work schedule right now things are just crazy I'd rather fit new ones in instead of having to repair the drywall reinstall and then repaint. Even having someone come to do it can be a pain because I'll need to be here to let them in and my hospital is slammed thanks to Omnicron. We had 19 callouts the other day that's enough staff to staff 5 of our units I'm getting my butt worked off literally
So I just want to get something up there and I think the Focal will work good at least I hope so Lol.
Then after Omnicron peaks and things calm down I'm taking some serious time off and going to enjoy that room
There's gonna be a new COVID mutation every damn year.
}Fear_Inoculum{
Senior Audioholic
Pretty much.
The only other thing you'd need would be a piece of backing to screw the new piece into. Either another smaller piece of drywall, or some short pieces of 1×6. Slap a little drywall compound on it to the fill joints. Smooth it out with a puty knife. Give it a little sand and a couple coats of paint. Voila. No more hole(s).
}Fear_Inoculum{
Senior Audioholic
And speaking of the old COVID, I'm currently sitting in my HT room watching "American Sniper" on Netflix as I'm in a 5 day quarantine/isolation as I tested positive for COVID-19 on Tuesday. Pretty mild symptoms so far, kind of like a mild flu/bad cold. This thing needs to go away.
AcuDefTechGuy
Audioholic Jedi
Get better soon. But, yeah, thank God for our HT rooms.
A
aceinc1
Enthusiast
Change it from a bug into a feature. What if you were to cut a piece of nice wood bigger than the existing hole, round over the sides to minimize diffraction, cut a hole for the new preferred driver in the wood, finish with stain or paint to taste and mount that.
Instead of hiding the ceiling speakers they would become a decorative part of the ceiling.
Instead of hiding the ceiling speakers they would become a decorative part of the ceiling.
Last edited:
D
Danzilla31
Audioholic Spartan
That's not a bad idea thanks!
A
aceinc1
Enthusiast
No problem, always remember;
"If the women don't find you handsome, they should at least find you handy."
- Red Green
D
Danzilla31
Audioholic Spartan
I'm going to attach this drawing and then get advice please view the picture I have attached above this drawing to better understand it
This is very crude but hopefully it does the jpb and ecplains my situation. . As you can see in the room pic I have 2 rows of seats. The overheads aren't right on top of both rows but they are closer then I'd like them to be as the crude drawing is trying to demonstrate the boxes with AS are atmos speakers so you can get an idea.
When these speakers come in
I have 2 options
Option one place them with the tweeter and mid facing forward to the back and the front. If they were far enough back from the 2 rows I'd happily do this
Or option 2 install them with the tweeter and mid facing in towards each row and the right side facing towards the rows from the right the left side facing in towards the left and then angle the mids and tweets to cover the rows since the tweeter and mid plate are completely movable for adjustment
Is option #2 a viable option?
Thanks in advance
Sitemap
Site Information
Site Information
HTML
