Search results

That is why we recommend ISF calibration or having a pro calibrate the display. So the picture is more accurate as established standards in video. Audio cables are different, since there are no standards, only bogus claims that are easily disproven. I have done the test. I calibrated my...

Having witnessed a few of my staff going through the training and seeing the end results on my own display, I can personally vouch for the difference! I would venture to say most displays you can get about 80-85% via the user controls and Avia disc if you have time and patience. Knowing what...

Doing controlled and accurate DBT testing is both time consuming and very involving. We have only seen them truly done correctly by the likes of Harman and the NRC. So far no credible source to our knowledge has been able to depict sonic differences in controlled DBT of cables. In the...

Again they missed the point. The very fact that her testing methodology was severely flawed, lead her to an erroneous conclusions that gave the reader the impression that the Monster cable “sounded” better and it was basically the same price (another misleading representation) as the generic...

<P><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">We're often asked questions about the suitability of particular cables or speaker wires for in-wall installation, and it's not surprising; with surround speakers being wired all around home theater rooms, ceiling-mounted projectors being...

Sjdpt; Sure we can always use more reviewers, send your resume and credentials to me at gds@audioholics.com. We are looking to cover alot more products this year. With speakers, it can be difficult since many manufacturers opt for us to beta test and NOT publish reviews of their products.

BMX points well taken. I always try to remain optimistic. I guess that can sometimes be my undoing.

Here is my original email to the USA Today report following our phone call interview. It was a pleasure speaking with you today regarding cables. We are appreciative of this interview opportunity and allowing us to get a very useful message out to an unwary public being constantly bombarded...

BMX we are not debating whether or not Monster products are good. We are however infuriated by the misquoting and the poor testing methodology in this article. Notice they didn't even mention the wire gauge used. How do we know they didn't simply pick up some 24AWG telephone cable from home...

Being misquoted really upsets us, but we thought you would find this delightfully shallow report (endorsement?) on Monster Cable products interesting. The main article is located here. While the main article has some nice statements in it such as the fact that "Nobody has ever been able...

My advice to anyone wanting us to review Pioneer receivers is to write or call them directly and request it. Its difficult finding a good contact with them. Also, regarding affordable amps, I will soon be publishing a review of a couple of 7CH $2k amps. Hope that helps out.

When I presented these cables at the Monster Booth during the CES show, I told the Monster people if they tried to copy this cable design and/or terminology, I would sue them :eek: However, I was willing to sell them the rights for a price :rolleyes:

Bad idea. Do not mix and match amps for biamping purposes unless they have the same overall gain structure otherwise you won't properly match levels between the mid/tweets and woofers. Unless you can vary the gain of your amp to match the Denon amp you will likely have a mismatch. IF...

I would steer clear of most pro amps. They are meant for sound reinforcement and usually give little regards to distortion and noise. Quaility amplifier power can be had cheaply and unless you are blasting music into a large room at full range, your current amps should be sufficient. The 200...

All; Just a reminder that we are updating our CES coverage daily and are now up to about 70 pages with much more to come. Visit our dedicated CES 2005 Coverage page for the latest and greatest the industy has to offer.

**********News Flash******** At CES we learned from Denon that the AVR-5805 actually has dual Ecore xformers (from the AVR-3805) and a single Torroid (from the AVR-5803) to power the 10 amps, along with 132,000uF of power supply capacitance. They also told us this amp is fully capable of...

We had several people tell us we need to assign a price tag on this. My idea was to charge a reasonable price for the cable itself and charge through the roof for the GLOB accessories which must be changed out daily for maximum performance :) What do you think guys?

They are still working out the details on the cabinet finish. So there were no demo models displayed at CES this time around. I did catch a glimpse at a prototype cabinet and it looks really cool. I think this will be worth the wait for sure. Stay tuned.... Yes it does, and most...

Monster Cable Official Response from Noel Lee, CEO Noel Lee, CEO of Monster Cable Products has issued an official response regarding recent negative publicity related to trademark issues and corporate usage of the word “Monster”. The following statement was sent to us directly from their legal...

RBH makes excellent inwall speakers. I have done numerous installs with their products and my clients have been most satisfied. They don't do the tiling woofers for the very reasons Pat has stated in the previous post. I am in full agreement! Triad makes inwalls also makes some...