I am looking at a combination of HK AVR 3600 receiver and klipsch Quintet™ SL Flat Panel Speaker with a klipsch 12" sub
( specs of the speakers)
FREQUENCY RESPONSE LCR: 80Hz-23kHz +/-3dB
Satellite: 120Hz-23kHz +/-3dB
POWER HANDLING LCR: 50 watts (200 watts peak)
Satellite: 50 watts (200 watts peak)
SENSITIVITY LCR: 93dB@2.83 volts/1 meter
Satellite: 91dB@2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQ CROSSOVER LCR: 2600Hz
Satellite: 2800Hz
( specs of HK AVR 3600)
Amplifier Type High-current; ±35 amps
Bandwidth 20Hz – 20kHz
Bandwidth @ 1W (+0dB/–3dB) 10Hz – 100kHz
Bass Management Quad crossover
Description 7.1-Channel AVR
EzSet® Capability EzSet/EQ™
HDMI Type V1.3a with Deep Color; full A/V processing & Repeater
Headphone Modes 2-Channel, Dolby HP
High Resolution GUI Yes
Multichannel Power (FTC) 80x7
Multizone Capability Yes
On-Screen Display Yes , all video formats
Output DACs 192kHz/24-bit
Preamp Outputs 7.1 Channels
THD @ Impedance 0.07% @ 8 Ohms
Video Processing / Conversion Faroudja DCDi Cinema™ scaling/processing to 1080p
--- Would this be a good combination or should I look at a different set of speakers or receiver. I am not really sure how to match the receiver power and the speakers power.
thanks for any advice.