TLS Guy Audioholic Jedi Oct 30, 2007 27,298 0 113 79 Eagan MN Jul 16, 2009 #21 Seth=L said: $175 for the Niles shipped $65 for the Adcom shipped I'm not going to beat myself down on these anymore than this. Click to expand... You seem to have it priced about right, but not getting much traction. The Adcom seems good value. Here is a recent eBay sale and another. The Niles looks a nice little amp. No past sales I can find on eBay, but one at $99 now. These units sell for $475 to $525 new in box, $419 open box, so I would say you are giving value. That Niles seems to have a cascaded triple output stage, which gives very linear current gain, and usually reliability. The Quad 303 introduced in 1967 used that configuration. That is probably the most bullet proof amp design in the history of audio. Here is a recent review and the telling of the tale, of the introduction of the first solid state amp that was as good as tubes. May be this will get some buzz going for you!
Seth=L said: $175 for the Niles shipped $65 for the Adcom shipped I'm not going to beat myself down on these anymore than this. Click to expand... You seem to have it priced about right, but not getting much traction. The Adcom seems good value. Here is a recent eBay sale and another. The Niles looks a nice little amp. No past sales I can find on eBay, but one at $99 now. These units sell for $475 to $525 new in box, $419 open box, so I would say you are giving value. That Niles seems to have a cascaded triple output stage, which gives very linear current gain, and usually reliability. The Quad 303 introduced in 1967 used that configuration. That is probably the most bullet proof amp design in the history of audio. Here is a recent review and the telling of the tale, of the introduction of the first solid state amp that was as good as tubes. May be this will get some buzz going for you!
lsiberian Audioholic Overlord Nov 17, 2008 12,393 0 113 On A Bridge in Fort Worth Jul 17, 2009 #22 I'd bite if I weren't paying for a wedding. But there are no XLRs on these so I"m not sure how to hook it up to my crossover.
I'd bite if I weren't paying for a wedding. But there are no XLRs on these so I"m not sure how to hook it up to my crossover.
Adam Audioholic Jedi Jul 5, 2006 32,066 0 113 Tucson, Arizona Jul 17, 2009 #23 lsiberian said: But there are no XLRs on these so I"m not sure how to hook it up to my crossover. Click to expand... I know that you have a wedding to pay for, but in case anyone else was wondering the same thing, you can get cable like this from Monoprice (and other places).
lsiberian said: But there are no XLRs on these so I"m not sure how to hook it up to my crossover. Click to expand... I know that you have a wedding to pay for, but in case anyone else was wondering the same thing, you can get cable like this from Monoprice (and other places).
lsiberian Audioholic Overlord Nov 17, 2008 12,393 0 113 On A Bridge in Fort Worth Jul 17, 2009 #24 Adam said: I know that you have a wedding to pay for, but in case anyone else was wondering the same thing, you can get cable like this from Monoprice (and other places). Click to expand... I think one needs an attenuator for a crossover.
Adam said: I know that you have a wedding to pay for, but in case anyone else was wondering the same thing, you can get cable like this from Monoprice (and other places). Click to expand... I think one needs an attenuator for a crossover.
Adam Audioholic Jedi Jul 5, 2006 32,066 0 113 Tucson, Arizona Jul 17, 2009 #25 lsiberian said: I think one needs an attenuator for a crossover. Click to expand... Oh. Well, I'm a mechanical engineer, not an electrical one. I just know how to physically connect things to one another.
lsiberian said: I think one needs an attenuator for a crossover. Click to expand... Oh. Well, I'm a mechanical engineer, not an electrical one. I just know how to physically connect things to one another.
lsiberian Audioholic Overlord Nov 17, 2008 12,393 0 113 On A Bridge in Fort Worth Jul 17, 2009 #26 Adam said: Oh. Well, I'm a mechanical engineer, not an electrical one. I just know how to physically connect things to one another. Click to expand... LOL. I have more respect for you now. Electrical engineers are just trouble makers anyway. I know what you mean too. Did you have to take a circuits course? Reactions: Adam
Adam said: Oh. Well, I'm a mechanical engineer, not an electrical one. I just know how to physically connect things to one another. Click to expand... LOL. I have more respect for you now. Electrical engineers are just trouble makers anyway. I know what you mean too. Did you have to take a circuits course?
Seth=L Audioholic Overlord Sep 26, 2006 13,444 0 113 Jul 18, 2009 #28 procell said: Trade for your auto parts you need? thanks Click to expand... I don't need auto parts, I need alignment done.
procell said: Trade for your auto parts you need? thanks Click to expand... I don't need auto parts, I need alignment done.
Seth=L Audioholic Overlord Sep 26, 2006 13,444 0 113 Jul 19, 2009 #30 Gosh people. I might just lose interest in selling these.
Seth=L Audioholic Overlord Sep 26, 2006 13,444 0 113 Jul 25, 2009 #31 Sale pending on CD player Amp still for sale $175 shipped.
B billpryor11 Audiophyte Mar 12, 2014 1 0 0 Mar 12, 2014 #34 would like to buy your adcom, thanks bill
ParadigmDawg Audioholic Overlord Nov 20, 2006 10,567 0 113 Hiding from Alex Mar 12, 2014 #35 At least the add is 5 years old yet.... billpryor11 said: would like to buy your adcom, thanks bill Click to expand...
At least the add is 5 years old yet.... billpryor11 said: would like to buy your adcom, thanks bill Click to expand...
