What about bi-amping your fronts with a full active system? use each channel for a speaker? This would sound much better anyway. I have an Alpine PXA-H400 digital crossover on craigslist that would work perfectly
1500 watts rms translates into about 120 amperes of current draw at 12.5 volts. with amplifier efficiency at say 70% that would put current draw at 156 amperes at full output. Since, at a moderate output level (95-100db), with music, one uses about 25% of that as a high conservative estimate, it puts current draw at around 39 amperes. Most stock electrical systems would have no issue with this amount of draw, especially since it is not constant.
Upgrading the main three electrical/current sections of cable (Alt. to bat.; bat. to chassis; chassis to eng. block) in the vehicle along with a high output battery addresses most current flow issues. Adding one of the large hybrid type capacitors from Stinger or Alumapro does not hurt at all either.