Looking at WiiM Amp Pro

[Danny Linguini]

New members here - greetings all.

I’m about to pull the trigger on a WiiM Amp Pro almost exclusively for streaming audio from an iPhone or iPad. I’ve been doing a lot of reading on this unit, and it looks like it will do all I need it to. Don’t care about the lack of Apple Air Play, as I’m fine just using bt as the audio source. My question mostly has to do with its power output. I have an older pair of Polk Blackstone TL3’s that I was pretty happy with as part of a 5.1 home theater setup that’s since been replaced and retired. TV sound duties are now covered by a Bose soundbar and sub, which is a perfect arrangement for my viewing habits. But for music, it’s just kinda meh. So I’m looking to revive those TL3’s for that purpose, since they’re sitting there doing nothing. I also have a JBL 10” sub at the ready to fill out the bottom end. TL3”s can handle up to 125w, with a sensitivity of 88 dB.

As for me, I can’t call myself an audiophile, but I do insist on something that can fill my 13’x18’ living room full and decently rich sound. I’m prepared to grab another pair of floor standing speakers if the Polks aren’t quite up to the task, though I’d rather not if I don’t have to. I’ve also looked at the more conventional stereo receivers, but they’re all a lot more than I need as far as features and functionality. I stumbled on integrated amps while researching options, which is how I found the Amp Pro.

Question: is the 60w pc of the Amp Pro sufficient to effectively drive the TL3’s? The last receiver they were hooked up yo was 100w pc, which seemed well matched for them and could get much louder than I needed, though I do like to rattle the walls every now and then. So for those times, I’m wondering if 60w per will be enough. Thanks in advance.

 

[MrBoat]

New members here - greetings all.

I’m about to pull the trigger on a WiiM Amp Pro almost exclusively for streaming audio from an iPhone or iPad. I’ve been doing a lot of reading on this unit, and it looks like it will do all I need it to. Don’t care about the lack of Apple Air Play, as I’m fine just using bt as the audio source. My question mostly has to do with its power output. I have an older pair of Polk Blackstone TL3’s that I was pretty happy with as part of a 5.1 home theater setup that’s since been replaced and retired. TV sound duties are now covered by a Bose soundbar and sub, which is a perfect arrangement for my viewing habits. But for music, it’s just kinda meh. So I’m looking to revive those TL3’s for that purpose, since they’re sitting there doing nothing. I also have a JBL 10” sub at the ready to fill out the bottom end. TL3”s can handle up to 125w, with a sensitivity of 88 dB.

As for me, I can’t call myself an audiophile, but I do insist on something that can fill my 13’x18’ living room full and decently rich sound. I’m prepared to grab another pair of floor standing speakers if the Polks aren’t quite up to the task, though I’d rather not if I don’t have to. I’ve also looked at the more conventional stereo receivers, but they’re all a lot more than I need as far as features and functionality. I stumbled on integrated amps while researching options, which is how I found the Amp Pro.

Question: is the 60w pc of the Amp Pro sufficient to effectively drive the TL3’s? The last receiver they were hooked up yo was 100w pc, which seemed well matched for them and could get much louder than I needed, though I do like to rattle the walls every now and then. So for those times, I’m wondering if 60w per will be enough. Thanks in advance.

60 watts should be fine, especially since a sub will be doing the heavy lifting. 88db sensitivity is pretty decent so it should be about perfect, really. Filling a whole 13' x 18' room? How far back from the speakers do you expect to be listening at? I get more near field for serious listening. Otherwise, the ambient byproduct of that setup is fine for the rest of the room, especially since I am the only audio head in this house. Everyone else thinks what they get beyond my concern sounds fine. They can always do the legwork and get into the sweet spot if it matters that much to them.

ETA: I just got the regular wiim amp and it sounds fine. App is pretty cool, although I don't think I will be using but a tiny fraction of what all it can do.

 

[Danny Linguini]

60 watts should be fine, especially since a sub will be doing the heavy lifting. 88db sensitivity is pretty decent so it should be about perfect, really. Filling a whole 13' x 18' room? How far back from the speakers do you expect to be listening at? I get more near field for serious listening. Otherwise, the ambient byproduct of that setup is fine for the rest of the room, especially since I am the only audio head in this house. Everyone else thinks what they get beyond my concern sounds fine. They can always do the legwork and get into the sweet spot if it matters that much to them.

ETA: I just got the regular wiim amp and it sounds fine. App is pretty cool, although I don't think I will be using but a tiny fraction of what all it can do.

Ahh, thank you - that’s exactly what I wanted to know. I’ll most likely be listening flopped on my couch, probably 15-16’ away from the speakers. With the old amp, they used to fill the room nicely, so I expect they’ll still be fine.

As for the app, I’m not much of a techie any more, so I’ll probably just use the very basics, room calibration and source selection. Maybe mess with the EQ a bit, but mostly I just want to chill and let the sound carry me away.

 

[PENG]

Ahh, thank you - that’s exactly what I wanted to know. I’ll most likely be listening flopped on my couch, probably 15-16’ away from the speakers. With the old amp, they used to fill the room nicely, so I expect they’ll still be fine.

Given that those satellite speakers can't really take much power anyway, the potential issue is not going to be the output of the wiiM pro, but the 15 to 16' distance and the spl you considered as "decently rich sound" mentioned in your original post.

If it is anywhere near reference level that is 85 dB average, 105 dB peak then there is no way. If it is 20 dB below that then you are good.

You can check things out under any assumed scenarios by using an online calculator such as the following:
Peak SPL Calculator

The nice thing about that amp is that you can adjust the crossover, so in your case, you may want to set it to 130-150 Hz or higher if you want to listen loud without hearing too much distortions, otherwise 100-110 Hz may be fine, but not lower.