Yamaha AVENTAGE 2021 AV Receivers Bulk Up on Power and 8K Features

[chapp]

I have an Auro 3d demo disc which I played using the 7.1.4 test signals. These were output to the respective channels without any issues. I also played some of the demo material and could hear sound from all the channels. 11 plus subwoofer. However, I did notice that the Yamaha showed that the signal was DTSHDMA... AURO 3d. The A8A did not output to Auro 3d if the format was "Straight" or "Auto". You have to change it to Auro 3d manually using the "Surround button" on the remote. You can use the Musiccast App to do this, too. To use the Auro 3d mix settings, you'll have to use the Musiccast app. I have not noticed any settings on the A8A directly.
Can someone confirm that the A8A indicates DTSHDMA...Auro 3d when playing a native Auro 3d disc like the Demo disc (Auro 3d).
I will try to discover what else is included in this firmware. I hope the other bugs have been displaced.

 

[Replicant 7]

I tried but nothing popped up. Maybe not available in Canada.

Hang in bro it's coming. They usually release those updates in batches.

 

[gene]

I think the most recent update is for Auro. I will check later this week.

 

[clone1008]

I think the most recent update is for Auro. I will check later this week.

A couple of other things also Gene...

 

[Dezed]

I tried but nothing popped up. Maybe not available in Canada.

I’m in Canada and my MusicCast says downloading firmware. But it’s been doing that for over 30 min lol

 

[Replicant 7]

I’m in Canada and my MusicCast says downloading firmware. But it’s been doing that for over 30 min lol

View attachment 53531

Got a internet issue? Mine took about 15 minutes.

 

[clone1008]

I’m in Canada and my MusicCast says downloading firmware. But it’s been doing that for over 30 min lol

View attachment 53531

Mine has been saying the same thing since this morning. Hard wired on internet.

 

[diablo676]

Just tried an experiment. Turned off the front speakers (put them on seperate amp for this test) and played Dolby 5.1 and 2.0 (though surround encoded) programmes. Using Dolby there was just a slight murmor coming from the heights. With the Auro 3D setting there were clear sounds from the heights, including vocals. So something is happening, though if it is right or not I don't know.

Will see if I prefer it.

Edit: 5.1 I'm watching now has no dialogue on the front heights, only music and effects. ??

 

[Dezed]

Mine has been saying the same thing since this morning. Hard wired on internet.

mines done now. I did turn off the receiver once in between maybe that kicked it into gear.

 

[clone1008]

mines done now. I did turn off the receiver once in between maybe that kicked it into gear.

I've tried turning it off, rebooting, unplugging, etc....it just sits there

 

[Dezed]

I can report that Dolby vision on nvidia shield is fixed! No black screen and no options menu toggle required.

unfortunately Dolby atmos on PC is not fixed yet.

hbo max streaming audio dropouts are fixed as well.

 

[clone1008]

It finally started...

 

[clone1008]

Auro 3D User Manual Supplement from the Yamaha UK site...

https://europe.yamaha.com/files/download/other_assets/0/1505990/web_VFS9290_RX-A8A_RX-A6A_AURO-3D_UCRABGLFP_En_A0.pdf

 

[AVR Enthu]

Is there any local or global list of Auro 3D available content?

 

[AVR Enthu]

Also, is there any compromise for Atmos vs. Auro 3D speaker configuration? If a system is set-up with presence layer rather than ceiling speakers, would this affect Atmos negatively?

 

[clone1008]

Is there any local or global list of Auro 3D available content?

There's a Facebook group...

Auro-3D

Auro-3D. 8,152 likes · 29 talking about this. Auro-3D® provides an immersive sound experience like never before, in film, music, gaming & on-the-go changing the way you experience sound.

www.facebook.com

 

[ryanosaur]

Also, is there any compromise for Atmos vs. Auro 3D speaker configuration? If a system is set-up with presence layer rather than ceiling speakers, would this affect Atmos negatively?

I’ve seen claims of putting top front (for example) as wall mounted up high at the ceiling with decent results.
I think as in all things audio, when it comes to layout, trying to follow best practice as best we can, while allowing for some necessary compromises, is allowable.
When I install atmos, it will likely be with “side heights” in place of overhead in-ceiling speakers.

 

[OldAndSlowDev]

The firmware update took maybe three minutes. But what a mess. When I press on display information I simply lose the sound and it’s then the tv that plays the sound. On the edge to return my Yamaha if they are releasing such updates. It’s not like they didn’t taken their time. My amp s basically not working

 

[OldAndSlowDev]

My music plays for 5s on the amp, and then stop and plays on the tv instead of the amp and speakers. Wtf Yamaha.

 

[Replicant 7]

My music plays for 5s on the amp, and then stop and plays on the tv instead of the amp and speakers. Wtf Yamaha.

Do a hard reset! Try that first.