Latest activity

So het. Since you’re using two subs you’ll need to set them individually first. Set one just under the green, then turn off that sub and...

What sub is it and what sort of gain settings are you using? I don't even know what left or right means on your particular avr, but...

The problem here is that at -12, we don’t know where the sub is set to compared to the rest of the speakers. If the speakers are set to...

What sub is it and what sort of gain settings are you using?

Do you have an spl meter? You should see what level it’s actually at when you’re at 12:00 or 9:00 or whatever. Audyssey just wants to...

I am SOOO DAMN done with this process! RAN TWICE with the same results! I put it way to the left and -12, I put it all the way to the...

You can using separate round of measurements like with REW, but pretty sure the MultEQ-X software can do that too, not familiar with...

If the result is -12 hard to know if that just coincided with you having turned the gain on your sub down sufficiently or not. Many of...

To combat the myth, misconception etc., we need to do it once a week, then it may sink in within 5 years, otherwise........;)

If the result is -12 hard to know if that just coincided with you having turned the gain on your sub down sufficiently or not. Many of...

With 1/2 way Gain mark on the sub is set, my Audyssey MultiEQ - XT is performed. After calibration I have to turn the Gain down to 9...

The avr trim level is limited to -12, it is trying to go lower but can't, why you have to lower the gain on the sub....might not take...

The avr trim level is limited to -12, it is trying to go lower but can't, why you have to lower the gain on the sub....might not take...

We are having a huge Control4 Black Friday Sale. Great prices through December 1, 2025! Contact us at the email address below.