Hi Everyone, I have drawn up a rough circuit for a trigger box, to power several 12 volt devices,
Can some one please have a quick look at the pic, just to make sure i havent done anything wrong.
Thx
Peter
Ever hear of SIB-KIS? See It Big- Keep It Simple.
You can do this with a simple relay and wall wart 12VDC power supply, triggered by the Denon. I have done it many times and it works great- I used a plastic project box or if time was short, an electrical junction box with no holes. a Bosch-style automotive relay draws about 150mA (typically less) and it's easy to wire-
Tab 85- +12V from wall wart
Tab 86- - from the wall wart
30- output from relay, to the equipment
Tab 87a- NC (No Connection)
Tab 87- +12V, looped from Tab 85
The wall wart obviously needs to be sized correctly.
