So, I'm trying to figure out what the next step in my stereo should be. Currently it's just a 2channel and I'd like to keep it like that. I have PSB 50 MKII's, and they sound pretty good, but I would like better sound. So I am wondering if a proper 2 channel receiver, a pre-amp or new speakers would be the best option? I will probably be updating all at some point, just not sure which I should do first.
Speakers -> PSB 50 MKII
Freq range-35Hz-21KHz.
Sensitivity-90dB.
Power handling-125 watts rms,150 watts peak.
Crossover-2000Hz third order acoustic butterworth,
18dB/octave incorporating high voltage capacitors.
Tweeter-1" textile dome
Woofer-8" polypropolyne in cast basket
Receiver -> Yamaha RX-V592
Power, Min. RMS Output power/ch., 8 ohms Main = 20 Hz - 20 kHz, 0.04% THD = 80W Center = 20 Hz - 20 kHz, 0.07% THD = 80W Rear Effects = 1 kHz, 0.3% THD = 40W
Dynamic Power Per Channel 8/6/4/2 ohms = 115/145/175/200W
Damping Factor 20 Hz - 20 kHz, 8 ohms = 80
Frequency Response 20 Hz - 20 kHz = +/-0.5 dB (CD)
Total Harmonic Distortion (20 Hz - 20 kHz) CD = 0.025% (40W) Phono = 0.01% (1V)
Signal-to-Noise Ratio, IHF-A Network CD = 96 dB Phono = 86 dB