pioneer elite vsx92thx (cannot select video parameter)

[clouso]

My pioneer vsx92thx sounds great and all but my only problem is that i cant select the video parameter it always shows (cannot select) on the receiver! im kind of a new audio freak and like to learn...anyone have any idea why i cannot select it?

 

[Adam]

Hi. Could you please give some more information? I don't know what problem you are having.

Are you trying to use the "V. PARAMETER" button on the remote control and it isn't working? If so, then you need to push the "RECEIVER" button in the source selector section (below the remote's display and next to the "TUNER" button) first, then push "V. PARAMETER".

 

[clouso]

Hi. Could you please give some more information? I don't know what problem you are having.

Are you trying to use the "V. PARAMETER" button on the remote control and it isn't working? If so, then you need to push the "RECEIVER" button in the source selector section (below the remote's display and next to the "TUNER" button) first, then push "V. PARAMETER".

Yes when i press the v.parameter on my remote it shows (cannot select) on the receiver...even when i have a hdmi signal or watching a movie(bd) it shows (cannot select)

 

[Adam]

Gotcha. I'll look into that in just a bit. I'm leaving to walk the pooch, but if no one else solves this, I'll be back in under two hours. Take it easy.

 

[clouso]

Gotcha. I'll look into that in just a bit. I'm leaving to walk the pooch, but if no one else solves this, I'll be back in under two hours. Take it easy.

Ok thx a lot!

 

[clouso]

Ok thx a lot!

btw here is my system..modest but planning to upgrade to studiov5 soon.. receiver(pioneer elite vsx92thx)...paradigm monitor series..11's v5(fronts)...cc390(center)...titan monitor(surround)...seismic12(sub) want a second one before they are discontinued!...panasonic dmp-bd35(blu-ray)..xbox360...explorer 4250HD...toshiba 72hm196(hdtv).

 

[bandphan]

Check to make sure you have the video conversion set to "amp"

 

[PSWii60]

I believe on the 94's the Video Parameter options are unavailable with HDMI input signals. About the only thing I think you could try is to hook up a component input then see if it lets you select it. Then see if you have a setting for HDMI pass through / auto and change it opposite whatever its current setting is. Also play around with the Video Conversion settings in the menus check for a pure / amp setting. I have a 84txsi so some of my menus may be different than yours. You will just have to play around to see if you can get it to cooperate.

 

[PSWii60]

Gotcha. I'll look into that in just a bit. I'm leaving to walk the pooch, but if no one else solves this, I'll be back in under two hours. Take it easy.

Sorry Adam, Didn't mean to steal your thunder, I just get excited when I find other people that have Elites. I actual feel helpful. I'm usually the one asking questions

 

[Adam]

Sorry Adam, Didn't mean to steal your thunder, I just get excited when I find other people that have Elites. I actual feel helpful. I'm usually the one asking questions

No thunder stolen at all! That was a great answer, my man. Hopefully it gets clouso up and running.

Oh, and yeah...from now on, there better be nobody else answering questions besides me.

(A couple of chicklets for ya, too. )

 

[clouso]

Sorry Adam, Didn't mean to steal your thunder, I just get excited when I find other people that have Elites. I actual feel helpful. I'm usually the one asking questions

thx...beleive it or not i just found out before you wrote this..lol...it must be on bd or dvd for examples..if i choose hdmi it doesnt work..now i can put the vid conv on 'on' but still cant make the video adjustments ??

 

[PSWii60]

I'm having a hard time following. On my 84 the audio and video parameters are all in one menu labeled "AV Parameters" within that menu my settings are as follows;

HDMI -> AMP
V CONV -> ON
RES -> PURE

I did toggle the different options and noticed if I turn V CONV -> OFF then my RES menu is no longer available. At any rate if HDMI -> AMP then it is going to route your audio to your receiver, if you set it to THROUGH it will send it to your TV and in conjunction will automatically change RES -> PURE with no option to change. Your menu structure is a little different on your 94, but I think the fundamentals are the same.

 

[clouso]

I'm having a hard time following. On my 84 the audio and video parameters are all in one menu labeled "AV Parameters" within that menu my settings are as follows;

HDMI -> AMP
V CONV -> ON
RES -> PURE

I did toggle the different options and noticed if I turn V CONV -> OFF then my RES menu is no longer available. At any rate if HDMI -> AMP then it is going to route your audio to your receiver, if you set it to THROUGH it will send it to your TV and in conjunction will automatically change RES -> PURE with no option to change. Your menu structure is a little different on your 94, but I think the fundamentals are the same.

if i put it on 'through' i got the image but no sound ..if i put it on 'amp' i got sound and image ...but cant make any video adjustments neither way ..all i can do is put the video conv 'on ' ..anyway thx i will work on it