Opinions of Anthem Users. I am considering the Anthem AVM 70 8K

[TLS Guy]

Correction: If I remember right, the latest Yamaha flagship YPAO R.S.C. does allow 8 bands of PEQs post calibration. If that is, true then I would rank it about the same as XT32+App, and should be better than XT32 without using the app. In both cases, one has to know how to use PEQs well (Yamaha), and the app well (D+M).

For those who can't be bother with manual tweaks, i.e. would just run it and leave it, then I would rank Dirac 1, 2 and 3, and Anthem ARC G 6th.

Note: While I am at it, for those who knows how, don't mind spending infinite hours, and most importantly use REW or equivalent for objective assessment, then I would rank DLBC, XT32 1, 1.5, Anthem ARC G YPAO RSC+PEQ 2, though on YPAO, I have not actually tried it so it is just based on projection/speculation. In that case they are all good, even for TLS Guy, if he wasn't preconceived/bias, he might be happy enough to use them.

I just need two sub outs, actually one is enough, as the first AVPs only had one sub out.

I don't have any need of any form of EQ and that feature would never be used.

Both the AVP10 and the Anthem units have 19" racks available.

At the moment the AVP 7706 is working perfectly. That spark on brief shut down on switch on last week, seems to have cured the fault for now. At the moment the rig is very quiet with zero background at all listening positions.

So, that spark I suspect has remade a bad solder connection.

My Av room is basically designed round the Marantz universe. This includes the facilities and the way the bass management is designed.

So the easiest changeover is a Marantz unit.

My biggest concern about Anthem is glitchy and slow software, and not SQ.

I doubt the difference in SQ without EQ is audibly detectable between any units. I don't need or want Eq as I don't want the rig to sound any different than it does now. It is incredibly life like and very close to actually being there. The bass is superbly tight, deep and realistic with never a trace of boom.

 

[AcuDefTechGuy]

For those who can't be bother with manual tweaks, i.e. would just run it and leave it, then I would rank Dirac 1, 2 and 3, and Anthem ARC G 6th.

Anthem ARC G 6th Place if no manual adjustments?

So if you just simply did AUTO ARC-G and XT32 and did absolutely nothing else, would XT32 do a better job?

My CX-A5100 can do Auto YPAO + Manual PEQ after using the YPAO, which was what Gene did.

 

[PENG]

Anthem ARC G 6th Place if no manual adjustments?

Based on my many REW graphs yes, that's doesn't mean it is a fact. Others, hopefully Gene or Theo would show their graphs to humor me. Until then, I can only state it as a matter of opinion, again, not facts.

So if you just simply did AUTO ARC-G and XT32 and did absolutely nothing else, would XT32 do a better job?

I got flatter response with XT32 consistently when nothing else was one post calibration runs, but I suspect in many cases, users may not likely the effect of that "BBC" dip, that could not be removed without using the app, or Audyssey pro.

My CX-A5100 can do Auto YPAO + Manual PEQ after using the YPAO, which was what Gene did.

That's what I thought but I forgot if it allows 8 PEQs or less. If 8 or more, then it would be like adding a minidsp 2X4HD but actually better practically speaking because the minidsp can only do the front 2 channels if used with an AVR, and it would create a spaghetti junction of wires.

 

[ski2xblack]

I don't have any need of any form of EQ

Of any form? Kind of veering off topic with this question, so forgive the digression. But it seems to me that eschewing eq of any form would necessitate only listening at volumes at which the system was calibrated, or very near to it. Lets say you calibrate at 85 db for optimum response. If you listen at 65-70 db, the overall tonal balance will be relatively anemic. If you calibrate the system at 70 db, listening sessions at 85 db will be relatively booming and bombastic. We can't just ignore the differences of our hearing's sensitivity to frequency extremes at different spls. It's just the nature of human hearing. So it seems that eq for loudness compensation is justified.

Granted, the Dynamic EQ that D&M product offers is not my favorite, as it doesn't allow as much adjustment as I would like (I do a lot of listening at rather low volume, where even with offsets maxed DEQ doesn't deliver the palp factor). Also, I know that in your rig the bsc and bass are meticulously tuned to your room, which would mitigate the need for loudness compensation eq somewhat.

Anywho, hope you get your pre/pro problem sorted, however that works out. Intermittent glitches are annoying as all get out.

 

[AcuDefTechGuy]

That's I forgot if it allows 8 PEQs or less.

Yamaha AVP/AVR PEQ is 7-bands.