On wall speaker conversion.

  • Thread starter Thread starter 140donaldstewart
  • Start date Start date
1

140donaldstewart

Audiophyte
Feb 3, 2019
3
0
3
60
Well this maybe not what most would consider doing but I thought I would try.
I needed on wall speaker and couldn't find a set for under $1000.
The speakers are 99% are used for home theater.
So I had an old set of energy tower speakers cf I think.
The existing Energy speakers were 15" deep ( to big to hang on wall) so I dismantled the speaker to see what space was needed.
I quickly realized the extra space was completely filled with insulation and very little room inside.
So there I went and cut them down to 6".
I made sure not cutting bracing and re glued back. I placed insulation back with thinner but same air space inside as it was before.
They sound great,
The setup is I use as my main TV.
Polk audio Lsim706 centre
Energy fronts.
Fluance bipole rears.
Dayton 12" sub.
Yamaha receiver.
Epson 6030 projector.
4k screen.

0522eada09cae9cca3c5aa86a0011530.jpg
6b56880a3db9a66f679e35f3a7486d73.jpg
b65028d728f1e89e2f8cca0001b60112.jpg
808f9338b6a7aaabb317d322c8c0a99f.jpg
1fe44a77b86ddb620b82017f89084a4e.jpg
88f4f5f71e326a7ec4281cf4da6a5ec2.jpg


Sent from my SM-G930W8 using Tapatalk
 
  • Like
Reactions: BriReeves629
Great Job! Those look like great sounding speakers.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: 140donaldstewart
Great Job! Those look like great sounding speakers.


Sent from my iPhone using Tapatalk
They sound very good, I don't notice any difference in sound from before the mod.
I am very pleased with how they turned out.


Sent from my SM-G930W8 using Tapatalk
 
My guess would be that you might have lost some of the low end on the speakers but you are using a sub that would make that irrelevant. Also the change might effect their power handling but the receiver isn't going to pump out near enough for you to worry about it.

If you are happy with the results that is what matters most!! *two thumbs way up*
 
  • Like
Reactions: 140donaldstewart
My guess would be that you might have lost some of the low end on the speakers but you are using a sub that would make that irrelevant. Also the change might effect their power handling but the receiver isn't going to pump out near enough for you to worry about it.

If you are happy with the results that is what matters most!! *two thumbs way up*
I may have lost a bit of the bass but my sub more then makes up for it.
Having them mounted at ear level made a huge difference. So far very happy with the sound.

Sent from my SM-G930W8 using Tapatalk
 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis