MINIDSP 2x4HD & Stereo Sub integration... Music only..no HT...

[djevlen]

Hi
want to integrate 2 subs into my stereo system with my bookshelf speakers so that the only devices that are connected to MINIDSP are the sub-woofers..i cant find such guides anywhere...Most guides are in context with HT... or mono subs.. and im overwhelemd by the whole science... The guide that come closest is "Stereo supporting woofers/FAST" page 22 ion minidsp forum :MiniDsp manual
please look at my drawing how i would like to integrate it :

Could some one please explain step by step how to do this correctly ? Got Laptop with rew and umic... And most important the MiniDSP is not allowed anywhere between the speakers ...only for woofers...
Any start up plan how to do would be greatly appreciated.

Greetings

 

[WaynePflughaupt]

If the amplifier “load” connections are a pass-through of the inputs, then your diagram will work. If not, you can simple use “y” splitters at the pre-amp outputs to get the signal to the 2 x 4 and hence the subs.

Regards,
Wayne A. Pflughaupt

 

[djevlen]

thanx...but its the setup of rew and minidsp i need help with

 

[lovinthehd]

Try some of these threads/articles? https://duckduckgo.com/?t=ffab&q=help+using+rew+and+minidsp+site:audioholics.com&atb=v136-1&ia=web