Klipsch synergy B3 speaker distortion need help

[Lexanikid22's]

I had a pair of these on some speaker mounts and after a year or so the mounts must have become loose so both speakers fell and hit the floor smh. Well now one of them sounds distorted. I took it apart and noticed on the woofer where the magnets connect to the basket or frame of the woofer is cracked. I don't know what to use to fix the seal and I'm not even sure if that will fix the problem. Any suggestions on what to use or what could be causing the distortion after it fell? I appreciate any help or advice thanks

 

[j_garcia]

You will need to replace the driver. Contact Klipsch or a Klipsch dealer for the replacement.

 

[Lexanikid22's]

I wasn't aware they still sold parts for the older models but thank you. I just hope it's cheaper then just buying another speaker all together

 

[j_garcia]

They should support them for a few years after production or they should be able to tell you if there is a readily available replacement. www.Partsexpress.com may also be able to help you as they offer some types of driver repair.