Yeah the Crossovers both say "Dividing Network" on them, is that a good thing? And i have a correction on the model numbers.
Both the Horns are: 806-8A
The bottom speakers (Subs?) both say: 416-8A
And the Crossovers both are N801-8a
Anymore help on pricing these is much appreciated!
The fact that the drivers are 416 series makes a big difference.
These drivers are from the Altec sound reinforcement series.
The horn is one of the Altec horns recommended to go with that driver, but the crossover is not. However the crossover point is at the recommended 800 Hz.
It is strange that there is no Altec model number on the enclosure. I still suspect that the speaker enclosures are not by Altec.
So I would value the speakers for their component value, which would put them around $1000 per speakers.
Although power handling is low by today's standards, the sensitivity is 114 db. However the impedance is 16 ohm, so a modern transistor amp will only deliver half its 8 ohm rated power driving those speakers.
The speakers will produce very high spl, and amp in the 200 to 250 watt per channel into 8 ohms per channel would be optimal.
The speakers are for auditorium use.