"Let our rigorous testing and reviews be your guidelines to A/V equipment – not marketing slogans"
Toggle sidebar Toggle sidebar

"His and Her" Master Bedroom HT

  • Thread starter Thread starter westcott
  • Start date Start date
W

westcott

Audioholic General
Jul 8, 2005
1,453
0
0
South of Houston, Texas
I thought I would share the system I threw together for the wife so she could watch her "Ghost Busters" without my constant verbal interjections.

Panasonic 42" Plasma, Wall mount, swivel and tilt
Denon DVD 910
Devon AVR 688
DishNetwork 622HD PVR
Altec Valencia Studio Monitor speakers
Klipsch RC7 center channel
Infinity SW12 subwoofer
Sanus AV Rack
Tripp Lite HT10DBS surge unit
Harmony 659
Blue Jean Cables

Just finished painting for the fourth of July BBQ. Curtains and a matching comforter are the finishing touches but will have to wait for the AC system to be replaced downstairs (Houston in summer:eek:).

Still have some testing for speaker and subwoofer placement but I am pleased with the results. Although the speakers are not timbre matched, they play rather well together and seem to have very similar efficiencies. I had never intended to use the Altec's for multi channel but it complements the system well. It will probably remain a 3.1 system.

His and Her Master Bedroom HT

Thanks to everyone that helped me round up the hardware.
 
Nice! Your bedroom TV is far better than my living room (read "only") TV. :)

Does the center channel restrict the movement of the TV on the swivel? From the picture, it looks like it might. Also, how do you like the Sanus stand? I contemplate getting that design now and again.

Thanks for the pics!

Adam
 
  • Like
Reactions: westcott
Adam said:
Nice! Your bedroom TV is far better than my living room (read "only") TV. :)

Does the center channel restrict the movement of the TV on the swivel? From the picture, it looks like it might. Also, how do you like the Sanus stand? I contemplate getting that design now and again.

Thanks for the pics!

Adam
Click to expand...

We really like the Panasonic performance. We got a great deal on it after thanksgiving. One of those door buster specials. It's black levels really are impressive and the contrast is just as enjoyable when properly calibrated.

You can not tell from the photo but the speaker is a good 10 inches from the display and does not interfere. My wife likes to swing it completely to one side in the mornings so she can sneak peaks from the bathroom.

The Sanus is what it is. It is economical, fitted my needs, and overall, looks very good. My minor quibble is the chessyness of the wire management "system". It is just a cheap piece of plastic that rests in two opposing groves in the back to hide the wires. If you have a lot of wires or just too much excess, you may struggle to get it on or it may not fit at all. I had to buy shorter component cables because the ones I had were too long and would not fit inside the plastic cover. I would also have made the top glass thicker. I have my TV hung on the wall because I would not trust the stand to hold the weight, even if my center channel was placed elsewhere. I have the center channel pulled all the way to the front edge to help support its weight as well as improve audio performance. The RC7 is heavy too.

I am glad you like the pictures.
 
  • Like
Reactions: Adam
Very nice. Hey those speakers don't need a sub do they? ;)

What brand mount did you use for the TV?
 
  • Like
Reactions: westcott
Duffinator said:
Very nice. Hey those speakers don't need a sub do they? ;)

What brand mount did you use for the TV?
Click to expand...

I think you can safely say that the Altec's are a true full range speaker. But, to save some money and sleep better at night, I added a subwoofer to take the load off of these very old speakers and provide more power for the LFE than the low cost receiver is probably capable of delivering for a sustained period of time.

Here is the link for the TV mount.

Wall mounts

I took the photos in a rush. I will take better ones after the room is complete. Thanks for taking time to comment.
 
Last edited:
I love the way you have the picture set up as bi-folds and it hides the projector screen. How did you go about doing this? I have an idea, but did you just take a regular picture and cut into 4 pieces? I must know before I go cutting any of my wifes paintings! Great set-up man. Cheers.

Joe
 
  • Like
Reactions: westcott
jmgonza6 said:
I love the way you have the picture set up as bi-folds and it hides the projector screen. How did you go about doing this? I have an idea, but did you just take a regular picture and cut into 4 pieces? I must know before I go cutting any of my wifes paintings! Great set-up man. Cheers.

Joe
Click to expand...

I made four frames out of MDF and used bisquet joints to assemble. I then stretched the canvas and primed it. I then painted them. Then I used piano hinges, latches, and magnets to hold the painting open and closed.

The simple contemporary design is explained by my total lack of painting experience. I figured even I could not mess up something so simple in design.

It was a lot of work and now I have a greater appreciation for artists, their hard work, and the cost of materials.

I am glad you like it. I am sure you can duplicate it. Just takes time and a few wood working tools.
 
You must log in or register to reply here.

Latest posts

newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top
Back