Dumb question about adding a microphone to a receiver's input?

A

a-dogg

Audioholic Intern
I have an Onkyo TX-SR602 and a Pioneer VSX-530-K. I have an event coming up that needs a PA system. Can I buy a cheap microphone and plug it into one of these, add some cheap speakers and use it as a jury-rigged PA?

I have a little phono pre-amp I can attach between the mic and amp, if that helps?
 
PietjePuk

PietjePuk

Enthusiast
A receiver is something completely different from a pa.... Whether it is sufficient depends on the size of the event
 
A

a-dogg

Audioholic Intern
A receiver is something completely different from a pa.... Whether it is sufficient depends on the size of the event
Yes, I get that. It's a very small event, I'm not worried about sufficiency. I just want to know if this will work.
 
TheWarrior

TheWarrior

Audioholic Ninja
Email the manufacturer, I'm not actually sure how/if this will work. Might need a mic preamp to control input sensitivity.
 
A

a-dogg

Audioholic Intern
I have this phono pre-amp, as well as a line-in bluetooth dongle that plugs into my receiver. What if I connected the bluetooth dongle to the pre-amp to an input on my receiver. Then bought a bluetooth mic. Do you think that would work?
 
TLS Guy

TLS Guy

Audioholic Jedi
I have this phono pre-amp, as well as a line-in bluetooth dongle that plugs into my receiver. What if I connected the bluetooth dongle to the pre-amp to an input on my receiver. Then bought a bluetooth mic. Do you think that would work?
The phono preamp will be no help. You need a small microphone mixer to plug the mic into, and then you can connect the mixer to a line in on your receiver.

Most mics are low impedance balanced and that is best. Avoid high impedance mics.
 
-Jim-

-Jim-

Audioholic Field Marshall
The phono preamp won't work because it has an equalization curve (it changes the signal from the cartridge in a non linear manner) and a fixed output according to standard specifications as I remember.

You need a Mic Pre-Amp and connect it into one of those receivers. Like TLS Guy said a small mixer (like a Behringer) would work.

Another way would be to get a Bluetooth Mic and connect it to the bluetooth dongle (which I assume is a bluetooth receiver dongle - please advise). Seems to be a ton of Karaoke Mics out there that should work.

Something like this: https://www.amazon.com/Wireless-Microphone-Amicool-Bluetooth-Smartphone/dp/B06XFWKXFF/ref=sr_1_2_sspa?ie=UTF8&qid=1505285727&sr=8-2-spons&keywords=bluetooth+microphone&psc=1

Or you can get a wireless Mic like found here for $40.

https://www.amazon.com/dp/B01MR0DXD1/ref=sxbs_sxwds-stvp_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3171424582&pd_rd_wg=RsMAy&pf_rd_r=6P683V7PBRB6W0PVR7FG&pf_rd_s=desktop-sx-bottom-slot&pf_rd_t=301&pd_rd_i=B01MR0DXD1&pd_rd_w=Ry1KK&pf_rd_i=bluetooth+microphone&pd_rd_r=F6SVJBKH17M9WYKAR7M1&ie=UTF8&qid=1505286231&sr=1

 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top