connecting Rotel 1066

[Niaspeed]

Need some help/advice on hooking up a Rotel 1066.

Heres my components/speakers:

Rotel 1066 Surround Processor
Rotel 991 Amp
Rotel RCD 970BX CD
Revox B251 Integrated Amp
B&W CC6 Center Channel
B&W 603 S3 Fronts
B&W 602 S2 Rears

I accumulated this system over the last few months. What I need to know is can I use the 991 for the fronts and the Revox for the rears, going thru the 1066 proc. and if so, which connects do I use for the 1066 to the 991 and B251.

Thank you for the help. TAD

 

[Highbar]

Well from I can tell, couldn't find too much info on the Revox, but you have 2, 2 channel amps. That only gives you 4 channels to power your 5 speakers, so somewhere you are going to need one more amp.

As for using what you have, the 2 Rotels are easy to hook together, you go from the front left and right outs on the 1066 to the ins on the 991. Since the Revox is an integrated amp I'm not sure what inputs you would use, I would imagine and Aux, but I'm sure someone here will know more then me.

Good luck.

T

 

[chadnliz]

pm me if you want to go over the hook up, I have a Rotel 1068 Pro so I am very familiar with what you need to do.