Building a Music Room

  • Thread starter Thread starter jcmusic
  • Start date Start date
J

jcmusic

Enthusiast
Dec 14, 2009
11
0
1
Hi Guys,
This is my first post here so please try and help me out!!! I am getting ready to build a dedicated 2 channel listening room and want some advice on the acoustics. The room will be 19.5X13X8 with one stndard size window and one door. I am curious about the ceiling can I use something on top of the sheetrock? Any and all adivce will be appreciated!!! Oh yea!!! the speakers will be on the short wall, they are Klipsch corner horns with SET power!!!

Jay
 
Hi Jay - welcome

The cavity above the drywall in the ceiling should be insulated. While that won't damp anything in the room, it will allow the sheetrock and cavity to provide a little midbass control and stop it from ringing like a drum.

Where is the door and window in relation to the length and width of the room?

Bryan
 
Hi Jay - welcome

The cavity above the drywall in the ceiling should be insulated. While that won't damp anything in the room, it will allow the sheetrock and cavity to provide a little midbass control and stop it from ringing like a drum.

Where is the door and window in relation to the length and width of the room?

Bryan

Hi Bryan,
Thanks for replying, the window will more than likely be on the one of the long walls, and the door on the rear wall. Thanks for your help.

Jay
 
Can you be a little more specific? Middle of the walls? Toward the corners? Try to keep them away from front corners of the room and the window away from your reflection points.

In general, you'll want some broadband bass control in the front corners and reflection panels on the sides at a minimum. Depending on speaker type and location to the boundaries, etc. nothing, absorption, or diffusion behind the speakers may be in order.

Rear wall - again, depends on how everything else falls whether you'll need bass control in the middle of that to deal with bass nulls.

Diffusion on the rear half of the side walls is always a nice thing if budget will allow.

Bryan
 
Can you be a little more specific? Middle of the walls? Toward the corners? Try to keep them away from front corners of the room and the window away from your reflection points.

In general, you'll want some broadband bass control in the front corners and reflection panels on the sides at a minimum. Depending on speaker type and location to the boundaries, etc. nothing, absorption, or diffusion behind the speakers may be in order.

Rear wall - again, depends on how everything else falls whether you'll need bass control in the middle of that to deal with bass nulls.

Diffusion on the rear half of the side walls is always a nice thing if budget will allow.

Bryan
Bryan,
In my first post I say there that my speakers are Klipsch Conrner horns, so that covers the front corners. I am thinking mid-way to toward the rear for the bookcases.

Jay
 
Sorry about that. With Khorns in the front, you'll want some absorption middle of the front wall and at the side wall reflections. Broadband bass control in the rear corners.

With an 8' ceiling, you'll likely also want something relatively thick directly over the listening position.

Bryan
 
  • Like
Reactions: jcmusic
Sorry about that. With Khorns in the front, you'll want some absorption middle of the front wall and at the side wall reflections. Broadband bass control in the rear corners.

With an 8' ceiling, you'll likely also want something relatively thick directly over the listening position.

Bryan

Ok Bryan,
I am thinking about setting up my gear as it is in it's current room, that would put the equipment rack in the center between the speakers. Is this going to create problems?

Jay
 
Ok Bryan,
Now one more thing, what type of materials should I use in the construction of the room? Anything really a must? Or can I just use standard building materials and then treat the room?

Jay
 
It all depends on how far you want to go in terms of isolation.

For the ultimate - Room in a room with walls decoupled with DC-04 clips, either floating joists or RSIC-1 with hat channel on the ceiling. Double drywall with Green Glue. All HVAC isolated. All outlets and switches and lights boxed around. Float a floor. Make sure you use a solid core wood door.

Something like that will give you an EXTREMELY low noise floor in the room allowing for excellent dynamic range possibilities, and the ability to hear way down into the details once the room is properly treated.

Bryan
 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis