Audyssey Calibration Question

[nicolairob]

Hi,
Hoping you can tell me if the channel levels that were calibrated seems right:

Equipment:
Denon 4308 (powers surrounds 140 watts and preamps Parasound)
Parasound 2003 A (powers mains and center 220 watts)
Mains - Def Tech Mythos STS (wired with speaker wire only - large)
Center - Def Tech CLR 3000
Surrounds - Axiom Qs4
Sub - Def Tech PF1500

Distance from Mains and Center = 10ft
Distance from R Surround = 3 ft
Distance from L Surround = 5 ft

Results:
FL = +10
FR = + 10
C = +7
Sub = -12
SR = + 9
SR = + 10

I just thought it was strange for it to "raise" the speakers and "lower" the sub to such extremes.
Thoughts?

Thanks,
Rob

 

[BoredSysAdmin]

Make sure to follow guide in this post - Best to download Word Doc.
It made a huge difference from basic 3 point setup I did initially.

http://www.avsforum.com/avs-vb/showthread.php?p=14456895#post14456895

 

[sholling]

Audyssey will get you close but I always go back with a tape measure and rat shack SPL meter to fine tune. Just keep in mind that rat shack meters read roughly 6db low with a 25hz tone so adjust accordingly.