Search results

You saw our review of the RX-V2400, we would like to hear what you think. Here is the place to voice your opinion.

I am about 22 pages into the review now and still have a few to go. I expect this review will be up by the 4th of July after it has gone through our peer review and the manufacturer had a change to look over the technical aspects. Stay tuned...

This article, courtesy of Christine Tham illustrates some very interesting differences between CD, DVD-A and SACD in terms of spectral content, and dynamics. CD, DVD-A, SACD Dynamic Comparisions

Sorry I just don't see the logic in your claim. Many of the "features" are integrated within the firmware of the receiver. Just because PRoduct A has more features than PRoduct B, doesn't necessarily mean Product A will be more susceptible to failures, especially if Product A has better QA and...

Why would a feature be more prone to fail on the Z-9 than any other receiver/processor? In fact, one advantage of Japanese electronics is their limitless resources to methodically do debugging and system testing of products prior to release. Yamaha has some of the highest reliability in the...

Audiosouse; The background noise you are experiencing doesn't sound right. However, since I don't have a unit personally to test, I can't say one way or the other. I recommend using the Zone2 assignment for the bass section of your speakers, that way if there is a higher noise floor, you...

John; Just wondering if you have a cable sniffer? You always seem to find a post at any forum that discusses cabling. As soon as I say mudcats first post, I knew you would join the party ;)

Lets step back for the moment and verify a few basics: 1) Did you calibrate your LCR meter before doing this test? 2) Did you calibrate for full frequency range? If so, what is the bandwidth of this device? If your device is bandwidth limited to 10kHz, check to see what the accuracy is at...

Yes it is and I originally suggested this when I wrote my 5803 review. Since both receivers operate similarly with respect to amplifier assignment and zone2 audio, it can be done on both units.

The Denon DVD-5900 I am testing the RX-Z9 with does pass DVD-A and SACD via i.link. However, older models need to be modded by Denon to enable the i.Link feature. I will find out what serial#'s are affected for this.

Its funny that this hobby seems to be dominated by males, especially since women generally have better hearing. I suppose they are not as fanatical about audio as we are, they concern themselves with more important matters :o

Rip; The links have been fixed, thanks for noticing.

Over the years controversy has raged back and forth on whether brick wall filters used in digital audio (namely for CD playback systems) exhibit phase shifts in the audio band (20Hz to 20kHz). Audio critics, pundits and assorted experts have gone back and forth on this issue with out much...

I see these type of statements pop up quite often so I thought I would address it here. Do NOT attempt to compare the capability of a receiver/amp based on the volume level you adjust to. Each manufacturer uses different potentiometers with different sensitivities and scales. Many of the...

Jeff; Rest assured when I can share details with you, this will be the first place to find them :) Hang in there, good stuff is coming ;)

The AVR-3805 is without a question an excellent bargain as far as receivers go. However, the AVR-5803 is a significant step up in terms of power and refinement. One could argue buying an AVR-3805 and putting the $3K saved into a dedicated 7CH amp and that certainly has its merits. However...

While the Sunfire is a powerful receiver, it is sad to see a receiver almost $3000 cheaper have over 15dB SNR advantage under the exact same 1watt test conditions.

What is likely happening here is you have a speaker system, perhaps a 3-way where the wooder is wired out of phase from the mids/highs, to electrically sum at its crossover point. This can trick the auto setup into thinking your speakers are out of phase. This can also happen with other...

As far as I know, everything works thru Dlink3, however via EXT ins bass management and room correction don't work. Clint has the test unit so I will have him correct me if I am wrong :eek:

Octavio; Great catch! I think Clint misinterpreted the rating criteria for that category. We assign 50 points for processors that have stereo sub outs and 25 points with one sub out/mono. We will update the score card to reflect the change. Thanks. No sleep timer? Bummer, guess...