Search results for query: class d

...are fully balanced designs, therefore they are incompatible with the L800's SDA technology. I would suggest Anthem, Parasound, Buckeye (if class d is of your liking) also Hypex have some great amps that will work great with the L800's keep in mind that Hypex have DIY amps kits that have great...

Well, it stands to reason that a DAC change could improve the situation. What has astounded me is how much it has improved multichannel audio. I would never have suspected that would be the case. It makes me wonder though, if part of this is to purposely reduce power to other than the front...

Whoever told you AB is better isn't doesn't have all the information on the two brands I mentioned as they are the most technically sound amps made today, with the Benchmark AHB2 us the closest class AB for large amps. Note that the amplifiers are load irrelevant and would handle your speakers...

Icepower 1200AS2 power amplifier module. I have the Icepower 200ASC that was one of the products that helped give me confidence in class D. That, and to ignore much of the hoopla about what amounts to inaudible measurement values on so many products these days, at least to my ears. All I know...

Class D amps have been around a long time. I used them all the time in my cars and trucks. My most recent use of Class D amps were in my 2007 Mustang. Had two Class D amps in that car. They were the original amps that came with the car. Sold that car back in 2017 so 10 year old amps that were...

I like to refer people who think active speakers are a new thing, to the Revox Agora B speakers of the early 1980's ... Great speaker if you can find one in good condition too...

Absolutely true! On ASR there are pictures of a serious design fault of improper cooling with the heat sink not properly attached. High end performance class D.

D@mn you, man. I sold one to another amigo, here, a bit ago. Of the original 5 I had, 4 remain. 2 are not in use, yet, pending my long slow slog to getting Atmos installed, they will be. Of course, if you want to make me an offer I can't resist... ;)

This AVR has Class D amps, not Class G.

I’m happy but I know purifi/hypex class d are great choice and better options out there.

It's mostly because there is not a lot of 200W+ 7 channel amps that aren't Class D. 5 Channel there are are more AB amps out there but 200W or higher are often something you see in a more dedicated 2-channel amp. You'll likely find a lot more 200W A/B monoblocks than you will 7 channel amps...

A 1 ohm test is not very useful. A speaker that has an impedance as low as 1 ohm at any point is a bad speaker with the crossover in resonance and not fit for use. I know some very expensive speakers do that, but they are not worth 2 cents. In an active speaker an amp will never see a 1 ohm...

Nice, it looks good.

Usually in a home environment, sustained high output situations for extended periods don't happen, even in action movies. I wish that @PENG will have a free moment to answer you. He is an electrical engineer and better knowledgeable on this question.

https://www.parts-express.com/Dayton-Audio-SPA100-D-100-Watt-Class-D-Subwoofer-Plate-Amplifier-300-805 Something like this might work. Mount it in a box and run speaker leads into the old sub. I would not recommend a Willy nilly thing for a main, single use subwoofer. But honestly for what you...

...to sound their best. Class AB amp will do the job too of course, something like the Monolith's 200 Wx2 8 ohms will do but the recommended class D amps will be better if you really want to push them to their limit. All amps (AB, A, or D) rated more than 200/300 W 8/4 ohms with THD<0.01%...

you need to read a review from Audio Science Review and look at the power graph ”knee” bend upward into distortion. There is very very little difference in power ratings between 0.01,0.1, & 1.0%. These are light years ahead of rotel‘s numbers...

Maybe go with a purifi or hypex class d. Best current bench measurements. Look at Buckeye, Nord or March.

I've just watched the video you posted, thanks. lol, Daren at Parasound is moving in the same direction as me (Class D, integration with other components). The video said there's pushback from the audiophile community about Class D, but I want to say that if those same people are already at...

Yes, it does mention that on the product page, thanks.